| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | INNER REAR VIEW MIRROR ASSEMBLY | 87810 | ( ) |
- | - |
| 2 | NO. 1 FORWARD RECOGNITION COVER | 86466D | - | - | - |
| 3 | NO. 2 FORWARD RECOGNITION COVER | 86466E | - | - | - |
| *A | w/ Front Camera | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87810 1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY
|
Install in this Direction | - | - |
Temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
86466D 2.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Front Camera)
86466E 3.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Front Camera)