Use the same procedure for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
73960A 1.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
82142A 2.INSTALL NO. 2 INSTRUMENT PANEL WIRE
Connect the 2 airbag connectors to install the No. 2 instrument panel wire.
When connecting any airbag connector, take care not to damage the airbag wire harness.
Make sure the lock button is securely locked.
Be sure to connect the connectors to each corresponding color.
Refer to How to Connect or Disconnect Airbag Connector: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR
Engage the claw.
82142 3.INSTALL NO. 2 INSTRUMENT PANEL WIRE
4.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
5. PERFORM DIAGNOSTIC SYSTEM CHECK
6.CHECK SRS WARNING LIGHT