If none of the switch indicators on the air conditioning control assembly illuminate, the following factors may be the cause.
| Malfunction Status | Factor |
|---|---|
| A/C switch indicator does not illuminate |
·
Air conditioning amplifier assembly malfunction
·
Air conditioning control assembly malfunction
·
A/C switch malfunction
·
One of servo motors (initialization incomplete)
·
Damper and link operation (jamming)
·
Refrigerant pressure (low pressure)
·
Low ambient temperature (including thermistor assembly) |
Check the malfunction status of switch indicators on the air conditioning control assembly.
| Result | Proceed to |
|---|---|
| A/C switch indicators are not always illuminated | A |
| A/C switch indicators are not illuminated only immediately after starting the engine | B |
A
B
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Ambient Temperature Sensor | Thermistor assembly (ambient temperature sensor) | -327.68 to 327.67°C | Actual ambient temperature displayed | Thermistor assembly (ambient temperature sensor) circuit malfunction |
| Tester Display |
|---|
| Ambient Temperature Sensor |
The display is as specified in the normal condition column (0°C (32°F) or higher).
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>ON-VEHICLE INSPECTION
NG