| *A | for Type A | *B | for Type B |
| *1 | NO. 1 CONDENSER BRACKET BUSH | *2 | NO. 2 CONDENSER BRACKET BUSH |
| *3 | NO. 1 CONDENSER BRACKET CUSHION | *4 | NO. 3 CONDENSER BRACKET BUSH |
| *5 | CONDENSER CORE | *6 | CAP |
| ● | Non-reusable part | - | - |
88F88D 1.REMOVE NO. 5 CONDENSER BRACKET
for Type A:
for Type B:
88F88E 2.REMOVE NO. 6 CONDENSER BRACKET
for Type A:
for Type B:
88F88 3.REMOVE NO. 1 CONDENSER BRACKET
for Type A:
| *1 | No. 1 Condenser Bracket Bush | *2 | No. 2 Condenser Bracket Bush |
for Type B:
| *1 | No. 1 Condenser Bracket Bush | *2 | No. 2 Condenser Bracket Bush |
88F88A 4.REMOVE NO. 2 CONDENSER BRACKET
for Type A:
| *1 | No. 1 Condenser Bracket Cushion | - | - |
for Type B:
| *1 | No. 1 Condenser Bracket Cushion | - | - |
88F88B 5.REMOVE NO. 3 CONDENSER BRACKET
for Type A:
| *1 | No. 3 Condenser Bracket Bush | - | - |
|
Remove in this Direction | - | - |
for Type B:
| *1 | No. 3 Condenser Bracket Bush | - | - |
|
Remove in this Direction | - | - |
88F88C 6.REMOVE NO. 4 CONDENSER BRACKET
for Type A:
| *1 | No. 3 Condenser Bracket Bush | - | - |
|
Remove in this Direction | - | - |
for Type B:
| *1 | No. 3 Condenser Bracket Bush | - | - |
|
Remove in this Direction | - | - |
7.REMOVE COOLER DRYER
| *1 | Condenser Core | - | - |
| *a | Modulator | - | - |
Using a 14 mm straight hexagon socket wrench, remove the cap from the modulator.
Using needle-nose pliers, remove the cooler dryer from the modulator.