| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY | 55607 | - | - | - |
| 2 | BLOWER MOTOR WITH FAN SUB-ASSEMBLY | 87103B | - | - | - |
| 3 | NO. 1 BLOWER MOTOR SUB-ASSEMBLY PACKING | 87127C | - | - | - |
| *A | for 1-tier Type | *B | for 2-tier Type |
| ● | Non-reusable part | - | - |
Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
55607 1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
87103B 2.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
| *A | for 1-tier Type | *B | for 2-tier Type |
| *A | for 1-tier Type | *B | for 2-tier Type |
|
Remove in this Direction | - | - |
87127C 3.REMOVE NO. 1 BLOWER MOTOR SUB-ASSEMBLY PACKING (for 2-tier Type)
Perform this procedure only when reusing the blower motor with fan sub-assembly.