| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 COOL BOX RETAINER | 58985E | - | - | - |
| 2 | NO. 2 COOL BOX RETAINER | 58987C | - | - | - |
| 3 | NO. 2 COOL BOX BOX PANEL | 58912F | - | - | - |
| 4 | NO. 1 COOL BOX BOX PANEL | 58911C | - | - | - |
| 5 | FRONT NO. 2 CONSOLE BOX INSERT | 58817C | - | - | - |
| 6 | FRONT NO. 1 CONSOLE BOX INSERT | 58816F | - | - | - |
| 7 | NO. 2 CONSOLE BOX DUCT | 58862B | - | - | - |
| 8 | NO. 1 CONSOLE BOX DUCT | 58861B | - | - | - |
| 9 | LOWER CONSOLE BOX POCKET | 58826B | - | - | - |
| 10 | COOL BOX CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY | 58905B | - | - | - |
| 11 | CONTROL SWITCH ASSEMBLY | 88610S | - | - | - |
| *1 | NO. 2 COOLING BOX ASSEMBLY | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 12 | AIR CONDITIONER HARNESS | - | - | - | - |
| 13 | COOLING BOX AMPLIFIER ASSEMBLY | - | - | - | - |
| 14 | CONSOLE COMPARTMENT BOX | - | - | - | - |
| 15 | INNER NO. 1 COOLER DUCT INSULATOR RH | 63935 | - | - | - |
| 16 | INNER NO. 1 COOLER DUCT INSULATOR LH | 63945 | - | - | - |
| 17 | NO. 2 COOLING BOX ASSEMBLY | 88530A | - | - | - |
| 18 | NO. 4 COOLING BOX PACKING | 87429F | - | - | - |
| ● | Non-reusable part | - | - |
| *1 | LOWER COOLING UNIT CASE | *2 | FRONT COOLING UNIT CASE |
| *3 | REAR COOLING UNIT CASE | *4 | CLAMP |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 27 | CUP HOLDER HOLE COVER | 55619E | - | - | - |
| 28 | CONSOLE CUP HOLDER BOX SUB-ASSEMBLY | 58803C | - | - | - |
| 29 | INTEGRATION CONTROL ASSEMBLY | 840C0A | - | - | - |
| 30 | CONSOLE BOX POCKET | 58825A | - | - | - |
| 31 | MOBILE WIRELESS CHARGER CRADLE ASSEMBLY | 861C0 | - | - | - |
| 32 | TRANSFER POSITION SWITCH | 84223A | - | - | - |
| 33 | ELECTRIC PARKING BRAKE SWITCH ASSEMBLY | 84390B | - | - | - |
| 34 | SHIFT POSITION INDICATOR | 35978 | - | - | - |
| 35 | SHIFTING HOLE COVER SUB-ASSEMBLY | 58808 | - | - | - |
| *A | w/o Wireless Charger | *B | w/ Wireless Charger |
| *1 | SHIFTING HOLE BEZEL | *2 | UPPER CONSOLE PANEL SUB-ASSEMBLY |
| *3 | CABLE TIE | - | - |
| ● | Non-reusable part | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58985E 1.REMOVE NO. 1 COOL BOX RETAINER
58987C 2.REMOVE NO. 2 COOL BOX RETAINER
58912F 3.REMOVE NO. 2 COOL BOX BOX PANEL
|
Remove in this Direction | - | - |
58911C 4.REMOVE NO. 1 COOL BOX BOX PANEL
Use the same procedure for the No. 2 box side panel.
58817C 5.REMOVE FRONT NO. 2 CONSOLE BOX INSERT
|
Remove in this Direction | - | - |
58816F 6.REMOVE FRONT NO. 1 CONSOLE BOX INSERT
Use the same procedure for the front No. 2 console box insert.
58862B 7.REMOVE NO. 2 CONSOLE BOX DUCT
58861B 8.REMOVE NO. 1 CONSOLE BOX DUCT
Use the same procedure for the front No. 2 console box duct.
58826B 9.REMOVE LOWER CONSOLE BOX POCKET
|
Remove in this Direction | - | - |
58905B 10.REMOVE COOL BOX CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
|
Remove in this Direction | - | - |
88610S 11.REMOVE CONTROL SWITCH ASSEMBLY
|
Remove in this Direction | - | - |
12.REMOVE AIR CONDITIONER HARNESS
13.REMOVE COOLING BOX AMPLIFIER ASSEMBLY
14.REMOVE CONSOLE COMPARTMENT BOX
63935 15.REMOVE INNER NO. 1 COOLER DUCT INSULATOR RH
63945 16.REMOVE INNER NO. 1 COOLER DUCT INSULATOR LH
88530A 17.REMOVE NO. 2 COOLING BOX ASSEMBLY
87429F 18.REMOVE NO. 4 COOLING BOX PACKING
87429C 19.REMOVE NO. 1 COOLING BOX PACKING
88710X 20.REMOVE NO. 1 COOLING BOX TUBE AND ACCESSORY ASSEMBLY
| *a | Protective Covering on the Pipe | - | - |
|
Remove in this Direction | - | - |
Remove the 2 screws.
Using a 5 mm hexagon socket wrench, remove the 2 hexagon bolts and No. 1 cooling box tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
Slide back the protective covering on the pipe when removing the hexagon bolt.
Return the protective covering on the pipe to its original position after removing the hexagon bolt.
87429E 21.REMOVE NO. 3 COOLING BOX PACKING
87429D 22.REMOVE NO. 2 COOLING BOX PACKING
23.REMOVE NO. 5 COOLING BOX PACKING
|
Double-sided Tape | - | - |
The double-sided tape attached to the No. 5 cooling box packing is used when the vehicle is assembled at the factory and does not require replacement during installation.
87103F 24.REMOVE COOL BOX BLOWER MOTOR WITH FAN SUB-ASSEMBLY
88625A 25.REMOVE NO. 2 COOLER THERMISTOR
| *1 | Clamp | - | - |
|
Remove in this Direction | - | - |
88501E 26.REMOVE COOLER (COOL BOX) EVAPORATOR SUB-ASSEMBLY
| *1 | Rear Cooling Unit Case | - | - |
Remove the cooler (cool box) evaporator sub-assembly from the rear cooling unit case.
Remove the 2 O-rings from the cooler (cool box) evaporator sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
55619E 27.REMOVE CUP HOLDER HOLE COVER
58803C 28.REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
840C0A 29.REMOVE INTEGRATION CONTROL ASSEMBLY
58825B 30.REMOVE CONSOLE BOX POCKET (w/o Wireless Charger)
861C0 31.REMOVE MOBILE WIRELESS CHARGER CRADLE ASSEMBLY (w/ Wireless Charger)
84223A 32.REMOVE TRANSFER POSITION SWITCH
84390B 33.REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY
35978 34.REMOVE SHIFT POSITION INDICATOR
for AC60F:
Click hereDrivetrain>AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>DISASSEMBLY
for AJA0F:
Click hereDrivetrain>AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>DISASSEMBLY
58808 35.REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY