| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL | - | ( ) |
- | - |
| 2 | POWER WINDOW REGULATOR SWITCH ASSEMBLY | 84810 | ( ) |
- | - |
| *1 | FRONT DOOR ARMREST BASE PANEL | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84810 2.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
Using a thin-bladed screwdriver, detach the claw and remove the power window regulator switch assembly from the front door armrest base panel RH.
Tape the thin-bladed screwdriver tip before use.