Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
87961 1.INSTALL OUTER MIRROR LH
| *A | w/ Blind Spot Monitor System | *B | w/ EC Mirror |
| *C | w/ Mirror Heater | - | - |
w/ Blind Spot Monitor System:
1. Connect the blind spot monitor indicator connector.
2. Attach the clamp.
w/ EC Mirror:
1. Connect the EC mirror connector.
2. Attach the clamp.
w/ Mirror Heater:
1. Connect the mirror heater connector.
Attach the claw to install the outer mirror LH.
Do not forcibly press on the outer mirror LH as the mirror surface may break.