| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT FENDER MUDGUARD LH | 76622D | ( ) |
- | - |
| *A | for Long Type | *B | for Short Type, Type A |
| *C | for Short Type, Type B | - | - |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
76622D 1.REMOVE FRONT FENDER MUDGUARD LH
for Long Type:
|
Remove in this Direction |
|
Screw |
|
Clip | - | - |
Remove the clip.
Using a 4 mm hexagon socket wrench, remove the 3 screws.
Detach the guide and remove the front fender mudguard LH as shown in the illustration.
for Short Type:
| *A | for Type A | *B | for Type B |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a 4 mm hexagon socket wrench, remove the 4 screws.
Detach the guide and remove the front fender mudguard LH as shown in the illustration.