| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | STEP SUB-ASSEMBLY LH | - | - | - | - |
| *A | for Standard | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 2 | STEP PLATE LH | 51772D | ( ) |
- | - |
| 3 | STEP SUB-ASSEMBLY LH | - | - | - | - |
| *A | for Full Cover Type | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE STEP SUB-ASSEMBLY LH (for Standard)
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
51772D 2.REMOVE STEP PLATE LH (for Full Cover Type)
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
|
Remove in this Direction (3) | - | - |
Put protective tape around the step plate LH.
Using moulding remover D, detach the vehicle front side clip.
Using moulding remover D, detach the vehicle rear side clip.
Detach the clip and guide and remove the step plate LH.
3.REMOVE STEP SUB-ASSEMBLY LH (for Full Cover Type)
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |