| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | GROMMET SCREW | - | - | - | - |
| 2 | NO. 3 SIDE STEP BRACKET LH | 51798 | - | - | - |
| 3 | NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH | 51082 | - | - | - |
| 4 | NO. 1 SIDE STEP BRACKET LH | 51794A | - | - | - |
| *A | for Full Cover Type | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
| *A | for Standard | - | - |
| *1 | Rivet | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.INSTALL GROMMET SCREW (for Full Cover Type)
51798 2.INSTALL NO. 3 SIDE STEP BRACKET LH (for Full Cover Type)
51082 3.INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH (for Full Cover Type)
51794A 4.INSTALL NO. 1 SIDE STEP BRACKET LH (for Full Cover Type)
51785 5.INSTALL NO. 2 STEP BRACKET GUSSET (for Standard)
Install the No. 4 nose piece to an air riveter and insert the mandrel section of a new φ 4 mm rivet into the nose piece.
Press the rivets perpendicularly to the installation holes. Using the air riveter, install the 2 No. 2 step bracket gussets with the 4 rivets.
When installing the rivets to the panel surface, do not tilt the riveter.
Do not leave a gap between the rivet head portion and the panel.
Pull the trigger again to cut off the rivet if it is not cut off.
51792C 6.INSTALL REAR STEP PANEL LH (for Standard)
Install the No. 4 nose piece to an air riveter and insert the mandrel section of a new φ 4 mm rivet into the nose piece.
Press the rivets perpendicularly to the installation holes. Using the air riveter, install the rear step panel LH with the 2 rivets.
When installing the rivets to the panel surface, do not tilt the riveter.
Do not leave a gap between the rivet head portion and the panel.
Pull the trigger again to cut off the rivet if it is not cut off.
51759A 7.INSTALL SIDE DOOR REAR STEP PLATE COVER LH (for Standard)
51774A 8.INSTALL SIDE DOOR FRONT STEP PLATE COVER LH (for Standard)
51798 9.INSTALL NO. 3 SIDE STEP BRACKET LH (for Standard)
51082 10.INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH (for Standard)
51794A 11.INSTALL NO. 1 SIDE STEP BRACKET LH (for Standard)