| *A | w/o Power Back Door | *B | w/ Power Back Door |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
76801 1.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
| *1 | Back Window Outside Moulding | - | - |
| *a | String | *b | Correct |
| *c | Incorrect | - | - |
|
String Pulling Direction | - | - |
Pass a string under the back window outside moulding as shown in the illustration.
Attach the clip and claw and install the back door outside garnish sub-assembly.
Apply soapy water to the back window outside moulding.
Slowly pull out the string to install the back window outside moulding to the correct position.
Install the 6 bolts.
64780A 2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67938A 3.INSTALL BACK DOOR SIDE GARNISH LH
67937B 4.INSTALL BACK DOOR SIDE GARNISH RH
67939B 5.INSTALL BACK DOOR CENTER GARNISH
69321 6.INSTALL BACK DOOR LOCK COVER
74811G 7.INSTALL DOOR PULL HANDLE (w/ Power Back Door)
64785A 8.INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)
74811B 9.INSTALL DOOR PULL HANDLE (w/o Power Back Door)