| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PRECAUTION | - | ( ) |
- | - |
| 2 | ROOF HEADLINING ASSEMBLY | - | - | - | - |
| 3 | ACTIVE NOISE CONTROL MICROPHONE | 86734D | - | - | - |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the active noise control microphone removal/installation are shown below.
When the cable is disconnected/reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. PRECAUTION
2.REMOVE ROOF HEADLINING ASSEMBLY
86734D 3.REMOVE ACTIVE NOISE CONTROL MICROPHONE
Use the same procedure described for the active noise control microphone.