| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PRECAUTION | - | ( ) |
- | - |
| 2 | FRONT SEAT ASSEMBLY LH | - | - | - | - |
| 3 | FRONT SEAT BELT SET LH | 73204A | - | - | - |
| 4 | FRONT SEAT BELT SET RH | 73203 | - | - | - |
| *A | for Driver Side | *B | for Front Passenger Side |
| *1 | FRONT SEAT ANCHOR PLATE | - | - |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the front seat assembly removal/installation are shown below.
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
When the cable is disconnected/reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
1. PRECAUTION
|
|
2.REMOVE FRONT SEAT ASSEMBLY LH
73204A 3.REMOVE FRONT SEAT BELT SET LH (for Driver Side)
| *A | w/ Memory | - | - |
|
Connector |
|
Nut |
73203 4.REMOVE FRONT SEAT BELT SET RH (for Front Passenger Side)
|
Band |
|
Connector |
|
Nut | - | - |