| *A | w/o Wire Harness | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) |
|
N*m (kgf*cm, ft.*lbf) : Specified torque |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 16 | REAR NO. 1 SEAT ASSEMBLY RH | - | - | - | - |
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
73380C 1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
| *A | w/ Seat Belt Warning System | - | - |
| *a | Protruding Part | - | - |
|
Install in this Direction |
|
Connector |
|
Nut | - | - |
Install the rear No. 1 seat belt inner assembly RH with the nut.
Do not allow the anchor part of the rear No. 1 seat belt inner assembly RH to overlap the protruding part.
w/ Seat Belt Warning System:
1. Attach the claw and clamp.
2. Connect the connector.
73350 2.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY
72995F 4.INSTALL REAR SEAT CUSHION COVER RH
71301G 5.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
71302C 6.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
82193 7.INSTALL REAR SEAT WIRE RH (w/o Wire Harness)
79967W 8.INSTALL REAR NO. 1 SEAT NO. 4 LEG SIDE COVER
79951B 9.INSTALL NO. 1 SEAT NO. 1 CUSHION COVER
79952A 10.INSTALL NO. 1 SEAT NO. 2 CUSHION COVER
78950F 11.INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY
71833S 12.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
72329F 14.INSTALL REAR SEAT ADJUSTER BOLT COVER
71834S 15.INSTALL REAR NO. 1 SEAT RECLINING COVER LH
16.INSTALL REAR NO. 1 SEAT ASSEMBLY RH