| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | BACK DOOR LOCK WITH CORTESY LIGHT SWITCH ASSEMBLY | 69350P | ( ) |
- | - |
| *A | w/o Power Back Door | *B | w/ Power Back Door |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
|
MP grease |
| *A | w/o Power Back Door | *B | w/ Power Back Door |
69350P 1.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY
|
|
w/o Power Back Door
|
Bolt |
|
Connector |
|
MP grease | - | - |
Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.
Install the back door lock with courtesy light switch assembly with the 3 bolts in the order shown in the illustration.
Connect the connector.
w/ Power Back Door
|
Bolt |
|
Connector |
|
MP grease | - | - |
Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.
Install the back door lock with courtesy light switch assembly with the 4 bolts in the order shown in the illustration.
Connect the connector.
64780A 2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67937B 3.INSTALL BACK DOOR SIDE GARNISH RH
67938A 4.INSTALL BACK DOOR SIDE GARNISH LH
67939B 5.INSTALL BACK DOOR CENTER GARNISH
69321 6.INSTALL BACK DOOR LOCK COVER
74811G 7.INSTALL DOOR PULL HANDLE (w/ Power Back Door)
64785A 8.INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)
74811B 9.INSTALL DOOR PULL HANDLE (w/o Power Back Door)
10.INSPECT POWER BACK DOOR SYSTEM