| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | HOOD SUPPORT ASSEMBLY | 53450A | ( ) |
- | - |
| 2 | ENGINE SIDE COVER | 51474B | - | - | - |
| *A | except 1GR-FE | - | - |
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
53450A 1.INSTALL HOOD SUPPORT ASSEMBLY
|
|
Engage the 2 ball joints to install the hood support assembly.
Install the hood support assembly while supporting the hood sub-assembly by hand.
Check that the ball joints are engaged securely and the hood support assembly cannot be pulled off.
51474B 2.INSTALL ENGINE SIDE COVER (except 1GR-FE)