| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | BACK DOOR STAY SET | 68960C | ( ) |
- | - |
| 2 | BACK DOOR DAMPER STAY UPPER BRACKET | 68946 | - | - | - |
| 3 | BACK DOOR DAMPER STAY LOWER BRACKET | 68948 | - | - | - |
| ★ | Precoated part | - | - |
Use the same procedure for the RH and LH sides.
The procedure below is for the LH side.
68960C 1.REMOVE BACK DOOR STAY SET
|
|
Using a screwdriver with its tip wrapped in protective tape, slightly raise the 2 stop rings as shown in the illustration.
Disengage the 2 ball joints to remove the back door stay set.
Remove the back door stay set while supporting the back door by hand.
Make sure to replace the back door stay set with a new one.
68946 2.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET
68948 3.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET