Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM38G0E _59 Vehicle Exterior _100887 DOOR / HATCH _0468203 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
B616824N05
4.875,0.302 5.875,0.469 1,0.167 5.198,3.156 6.198,3.323 1,0.167 0.854,1.604 1.188,1.604 false 5.74,2.656 6.031,2.656 false 5.948,1.5 6.292,1.5 false 6.208,3.24 6.375,3.24 6.375,3.24 6.542,2.906 false 5.875,0.385 6.042,0.385 6.042,0.385 6.24,0.615 false 5.531,0.74 5.823,0.74 false 5.344,0.615 5.625,0.969 0.281,0.354 18 false 2 5.781,1.375 6.063,1.729 0.281,0.354 18 false 3 5.552,2.531 5.833,2.885 0.281,0.354 18 false 1 6.375,0.583 6.656,0.938 0.281,0.354 10 false x2 4.938,0.302 6,0.51 1.063,0.208 8 false 9.0 (92, 80 in.*lbf) 4.875,3.135 5.292,3.385 0.417,0.25 10 false ● ★ 4.563,0.292 4.979,0.542 0.417,0.25 10 false ● ★ 6.677,2.771 6.958,3.125 0.281,0.354 10 false x2 5.25,3.156 6.313,3.365 1.063,0.208 8 false 9.0 (92, 80 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 BACK DOOR DAMPER STAY LOWER BRACKET 68948 (Click here) - -
2 BACK DOOR DAMPER STAY UPPER BRACKET 68946 (Click here) - -
3 BACK DOOR STAY SET 68960C (Click here) - -

V100146

N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part
★ Precoated part - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure below is for the LH side.



PROCEDURE

Hide 68948 1.INSTALL BACK DOOR DAMPER STAY LOWER BRACKET

a.
B610679C02
5.573,0.844 5.885,0.938 true 0.438,0.073 0.813,0.333 0.375,0.26 18 true i, ii 4.01,0.052 4.292,0.333 0.281,0.281 18 false iii 5.927,0.875 6.135,1.083 0.208,0.208 10 true *a
*a Arrow mark - -
V100144

Cleaning area - -


i.

Clean the bolt holes in the vehicle body.


ii.

When reusing a bolt:

1. Clean the threads of the bolts.

2. Apply a few drops of adhesive to 2 or 3 threads at the tip of each of the bolts.


iii.

Install the back door damper stay lower bracket with 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

HINT:

With the door closed, install the back door damper stay lower bracket so that the arrow marker is facing the top side of the vehicle.




Hide 68946 2.INSTALL BACK DOOR DAMPER STAY UPPER BRACKET

a.
B610678C01
5.677,0.729 5.917,0.979 true 0.458,0.031 0.854,0.302 0.396,0.271 18 false i, ii 4.135,0.042 4.385,0.313 0.25,0.271 18 false iii 5.896,1.01 6.073,1.198 0.177,0.188 10 true *a
*a Arrow mark - -
V100144

Cleaning area - -


i.

Clean the bolt holes in the vehicle body.


ii.

When reusing a bolt:

1. Clean the threads of the bolts.

2. Apply a few drops of adhesive to 2 or 3 threads at the tip of each of the bolts.


iii.

Install the back door damper stay upper bracket with 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

HINT:

With the door closed, install the back door damper stay upper bracket so that the arrow marker is facing the top side of the vehicle.




Hide 68960C 3.INSTALL BACK DOOR STAY SET

Z101186

CAUTION:
·
B611130

Do not perform work if the back door is not securely supported.

·

The back door could fall, resulting in injury.



NOTICE:
·

Avoid touching the piston rod as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the power back door drive unit in order to prevent the piston rod from deforming.




a.
B625751