| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 CUP HOLDER | 66991B | ( ) |
- | - |
| 2 | REAR POWER SEAT SWITCH | 84923 | - | - | - |
| 3 | NO. 1 FOLD SEAT SWITCH ASSEMBLY | 84190A | - | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 4 | QUARTER TRIM LID SUB-ASSEMBLY LH | 62606A | - | - | - |
| 5 | FOLD SEAT SWITCH ASSEMBLY | 84190 | - | - | - |
66991B 1.REMOVE NO. 1 CUP HOLDER
|
Remove in this Direction |
|
Protective Tape |
Put protective tape around the No. 1 cup holder.
Using a moulding remover D, detach the claw and remove the No. 1 cup holder.
Disconnect the 2 connectors.
84923 2.REMOVE REAR POWER SEAT SWITCH
|
Remove in this Direction | - | - |
84190A 3.REMOVE NO. 1 FOLD SEAT SWITCH ASSEMBLY
|
Remove in this Direction | - | - |
62606A 4.REMOVE QUARTER TRIM LID SUB-ASSEMBLY LH
|
Remove in this Direction | - | - |
84190 5.REMOVE FOLD SEAT SWITCH ASSEMBLY
|
Remove in this Direction | - | - |