Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › ADAPTIVE HIGH BEAM SYSTEM › 2021.04–2022.11
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0468606 ADAPTIVE HIGH BEAM SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  ADAPTIVE HIGH BEAM SYSTEM  B249096  AHS Fan LH Component Internal Failure  B249196  AHS Fan RH Component Internal Failure  


DESCRIPTION

The light control LED ECU receives adaptive high beam system control signals from the headlight ECU sub-assembly via LIN communication and drives the LED array fan to cool LED array to prevent it from overheating.

The LED array fan operates under normal circumstances when the low beam headlights are illuminated.

The light control LED ECU monitors the LED array fan speed signal (FANS terminal pulse signal) and when a malfunction is detected, it outputs a signal to the headlight ECU sub-assembly via LIN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B249096 AHS Fan LH Component Internal Failure
Detection condition:

All of the following conditions are met:

-

Ignition switch ON

-

Low beam headlights on



Malfunction status:

LED array fan malfunction signals are received from light control LED ECU LH


Malfunction duration:

-


·

Headlight unit assembly LH

·

Headlight LED unit assembly LH

·

Light control LED ECU LH


Headlight Control A
B249196 AHS Fan RH Component Internal Failure
Detection condition:

All of the following conditions are met:

-

Ignition switch ON

-

Low beam headlights on



Malfunction status:

LED array fan malfunction signals are received from light control LED ECU RH


Malfunction duration:

-


·

Headlight unit assembly RH

·

Headlight LED unit assembly RH

·

Light control LED ECU RH


Headlight Control A

WIRING DIAGRAM

E400522E22
5.104,1.188 5.448,1.458 0.344,0.271 10 false 10 5.125,1.406 5.438,1.604 0.313,0.198 10 false 20 5.125,1.635 5.396,1.896 0.271,0.26 10 false 11 4.76,1.188 5.073,1.385 0.313,0.198 10 false 11 4.792,1.417 5.104,1.615 0.313,0.198 10 false 9 4.771,1.625 5.083,1.906 0.313,0.281 10 false 10 4.344,1.177 4.75,1.385 0.406,0.208 10 false FAN+ 4.313,1.406 4.76,1.635 0.448,0.229 10 false FANS 4.354,1.635 4.771,1.938 0.417,0.302 10 false FAN- 4.219,0.844 4.677,1.042 0.458,0.198 10 false 5 V 4.219,5.031 4.677,5.229 0.458,0.198 10 false 5 V 4.354,5.365 4.76,5.552 0.406,0.188 10 false FAN+ 4.323,5.583 4.771,5.781 0.448,0.198 10 false FANS 4.375,5.802 4.781,6.177 0.406,0.375 10 false FAN- 4.771,5.344 5.083,5.542 0.313,0.198 10 false 11 4.792,5.573 5.104,5.771 0.313,0.198 10 false 9 4.771,5.792 5.031,6.042 0.26,0.25 10 false 10 5.125,5.344 5.323,5.542 0.198,0.198 10 false 10 5.125,5.563 5.323,5.771 0.198,0.208 10 false 20 5.135,5.802 5.323,6 0.188,0.198 10 false 11 1.698,0.271 2.198,0.438 0.5,0.167 10 false LIN I/F 3.396,1.354 3.854,1.552 0.458,0.198 10 false LIN 3.135,1.344 3.448,1.542 0.313,0.198 10 false 13 2.656,1.302 2.885,1.531 0.229,0.229 10 false 13 2.708,1.49 2.865,1.688 0.156,0.198 10 false C 0.958,1.5 1.198,1.698 0.24,0.198 10 false B4 0.948,1.302 1.26,1.5 0.313,0.198 10 false 20 1.281,1.344 1.76,1.635 0.479,0.292 10 false LINL 2.063,1.333 2.833,1.531 0.771,0.198 10 false LIN1_2 3.917,1.49 4.229,1.688 0.313,0.198 10 false IC 5.51,2.542 5.667,2.74 0.156,0.198 10 false E 5.635,2.021 6.75,2.323 1.115,0.302 10 false LED Array Fan 5.521,2.688 6.708,3.031 1.188,0.344 10 false Headlight Unit LH 3.26,2.552 3.792,2.792 0.531,0.24 10 false D 3.26,2.708 6.323,2.906 3.063,0.198 10 false Light Control LED ECU LH 0.948,5.667 1.177,5.865 0.229,0.198 10 false B7 0.948,5.479 1.26,5.677 0.313,0.198 10 false 20 1.292,5.5 1.771,5.792 0.479,0.292 10 false LINL 2.063,5.49 2.833,5.688 0.771,0.198 10 false LIN1_2 2.708,5.656 2.865,5.854 0.156,0.198 10 false C 2.656,5.469 2.906,5.698 0.25,0.229 10 false 13 3.146,5.51 3.563,5.698 0.417,0.188 10 false 13 3.396,5.51 3.854,5.708 0.458,0.198 10 false LIN 3.917,5.635 4.125,5.813 0.208,0.177 10 false IC 5.625,6.188 6.74,6.49 1.115,0.302 10 false LED Array Fan 5.49,6.708 5.646,6.906 0.156,0.198 10 false E 5.49,6.875 6.677,7.229 1.188,0.354 10 false Headlight Unit RH 3.313,6.719 3.885,6.917 0.573,0.198 10 false D 3.313,6.885 6.375,7.083 3.063,0.198 10 false Light Control LED ECU RH 0.781,8.406 2.406,8.573 1.625,0.167 10 false : LIN Communication Line 0.927,3.792 3.531,4.052 2.604,0.26 10 false Headlight ECU Sub-assembly LH 4.063,3.458 5.844,3.688 1.781,0.229 10 false Headlight Unit Assembly LH 4.167,7.625 6.021,7.875 1.854,0.25 10 false Headlight Unit Assembly RH 0.938,7.958 3.49,8.188 2.552,0.229 10 false Headlight ECU Sub-assembly RH

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Headlight Control > Clear DTCs
50002 462

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch to ON.


b.

Operate the light control switch to turn on the low beam headlights.


Procedure1

c.

Check for DTCs.

Body Electrical > Headlight Control > Trouble Codes
50001 462
Result:
Result Proceed to
B249096 and B249196 are not output A
B249096 is output B
B249196 is output C



Post-procedure1

d.

None



A

B

3.INSPECT HEADLIGHT UNIT ASSEMBLY LH

C

5.INSPECT HEADLIGHT UNIT ASSEMBLY RH
3.INSPECT HEADLIGHT UNIT ASSEMBLY LH

Pre-procedure1

a.

Remove the headlight unit assembly LH.

HINT:

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY>DISASSEMBLY



Procedure1

b.

Measure the resistance according to the value(s) in the table below.

E442704C01
1.854,0.656 2.198,0.917 0.344,0.26 4.99,0.604 5.333,0.865 0.344,0.26 2.073,2.208 2.375,1.677 false 2.698,1.677 3.125,2.177 false 2.656,2.198 2.552,1.677 false 1.073,0.729 1.385,0.927 0.313,0.198 10 false *a 4.292,0.625 4.604,0.823 0.313,0.198 10 false *b 1.99,0.708 2.302,0.906 0.313,0.198 10 false D 5.125,0.656 5.438,0.854 0.313,0.198 10 false E 3.031,2.208 3.521,2.438 0.49,0.229 10 false FAN+ 2.542,2.24 2.979,2.51 0.438,0.271 10 false FAN- 1.906,2.24 2.344,2.51 0.438,0.271 10 false FANS
*a Component without harness connected
(to Light Control LED ECU LH)
*b Component without harness connected
(to Headlight Unit LH)


Standard Resistance:
Tester Connection Condition Specified Condition
D-11 (FAN+) - E-10 Always Below 1 Ω
D-9 (FANS) - E-20 Always Below 1 Ω
D-10 (FAN-) - E-11 Always Below 1 Ω


Result:
Proceed to
OK
NG



Post-procedure1

c.

None



OK

4.INSPECT LIGHT CONTROL LED ECU LH

NG

REPLACE HEADLIGHT UNIT ASSEMBLY LH

4.INSPECT LIGHT CONTROL LED ECU LH

Pre-procedure1

a.

Connect the except headlight unit LH connectors.


Procedure1

b.
E442469C01
1.542,0.26 1.969,0.51 0.427,0.25 1.719,0.313 1.875,0.51 0.156,0.198 10 false E 0.771,0.396 1.094,0.656 0.323,0.26 10 false *a
*a Component without harness connected
(to Headlight Unit LH)


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
E-10 - E-11 Low beam headlights on 4.75 to 5.25 V
E-20 - E-11 Low beam headlights on 4.75 to 5.25 V


Result:
Proceed to
OK
NG



Post-procedure1

c.

None



OK

NG

REPLACE LIGHT CONTROL LED ECU LH

5.INSPECT HEADLIGHT UNIT ASSEMBLY RH

Pre-procedure1

a.

Remove the headlight unit assembly RH.

HINT:

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY>DISASSEMBLY



Procedure1

b.

Measure the resistance according to the value(s) in the table below.

E442704C01
1.854,0.656 2.198,0.917 0.344,0.26 4.99,0.604 5.333,0.865 0.344,0.26 2.073,2.208 2.375,1.677 false 2.698,1.677 3.125,2.177 false 2.656,2.198 2.552,1.677 false 1.073,0.729 1.385,0.927 0.313,0.198 10 false *a 4.292,0.625 4.604,0.823 0.313,0.198 10 false *b 1.99,0.708 2.302,0.906 0.313,0.198 10 false D 5.125,0.656 5.438,0.854 0.313,0.198 10 false E 3.031,2.208 3.521,2.438 0.49,0.229 10 false FAN+ 2.542,2.24 2.979,2.51 0.438,0.271 10 false FAN- 1.906,2.24 2.344,2.51 0.438,0.271 10 false FANS
*a Component without harness connected
(to Light Control LED ECU RH)
*b Component without harness connected
(to Headlight Unit RH)


Standard Resistance:
Tester Connection Condition Specified Condition
D-11 (FAN+) - E-10 Always Below 1 Ω
D-9 (FANS) - E-20 Always Below 1 Ω
D-10 (FAN-) - E-11 Always Below 1 Ω


Result:
Proceed to
OK
NG



Post-procedure1

c.

None



OK

6.INSPECT LIGHT CONTROL LED ECU RH

NG

REPLACE HEADLIGHT UNIT ASSEMBLY RH

6.INSPECT LIGHT CONTROL LED ECU RH

Pre-procedure1

a.

Connect the except headlight unit RH connectors.


Procedure1

b.
E442469C01
1.542,0.26 1.969,0.51 0.427,0.25 1.719,0.313 1.875,0.51 0.156,0.198 10 false E 0.771,0.396 1.094,0.656 0.323,0.26 10 false *a
*a Component without harness connected
(to Headlight Unit RH)


Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
E-10 - E-11 Low beam headlights on 4.75 to 5.25 V
E-20 - E-11 Low beam headlights on 4.75 to 5.25 V


Result:
Proceed to
OK
NG



Post-procedure1

c.

None



OK

NG

REPLACE LIGHT CONTROL LED ECU RH