| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | TRANSMISSION REVOLUTION SENSOR (SP2) | 89413W | ( ) |
- | - |
| 2 | TRANSMISSION REVOLUTION SENSOR (NT) | 89413N | ( ) |
- | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
|
Toyota Genuine ATF WS | - | - |
89413W 1.INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)
Coat a new O-ring with ATF and install it to the transmission revolution sensor (SP2).
Be careful not to damage or twist the O-ring.
Install the transmission revolution sensor (SP2) with the bolt.
Connect the transmission revolution sensor (SP2) connector.
89413N 2.INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
Coat a new O-ring with ATF and install it to the transmission revolution sensor (NT).
Be careful not to damage or twist the O-ring.
Install the transmission revolution sensor (NT) with the bolt.
Connect the transmission revolution sensor (NT) connector.