| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FLOOR SHIFT LEVER ASSEMBLY | - | - | - | - |
| 2 | DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY | 33820B | ( ) |
- | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 3 | REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY | 33820B | ( ) |
- | - |
| ● | Non-reusable part | - | - |
1.REMOVE FLOOR SHIFT LEVER ASSEMBLY
33820B 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
|
Push In | - | - |
Detach the clamp and disconnect the wire harness connector holder.
Detach the grommet from the vehicle body.
Push in the grommet to the floor hole and disconnect the transmission control cable assembly from the vehicle body.
Do not twist the transmission control cable assembly too much.
33820B 3.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
| *a | Clip | *b | 45° to 60° |
|
Remove in this Direction | - | - |
Remove the clip from the No. 1 transmission control cable bracket.
While disengaging the clip as shown in the illustration, disconnect the transmission control cable assembly from the transmission control shaft lever RH together with the clip.