Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSFER ADAPTER OIL SEAL
RM38G0E _52 Drivetrain _100436 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0468728 TRANSFER ADAPTER OIL SEAL A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSFER ADAPTER OIL SEAL  REPLACEMENT  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the transfer adapter oil seal removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
Gas leaks from exhaust system Inspection after repair
·

Poor idle, etc.

·

Engine start function, etc.


(Click here)

PROCEDURE

Hide 36100 1.REMOVE TRANSFER ASSEMBLY

Hide 36117A 2.REMOVE TRANSFER ADAPTER OIL SEAL

a.
C456039N01
1,0.75 1.25,0.75 1.25,0.75 1.583,0.417 false 0.667,0.667 1.083,0.833 0.417,0.167 10 false SST

Using SST, remove the transfer adapter oil seal.

SST
09308-00010  


Hide 36117A 3.INSTALL TRANSFER ADAPTER OIL SEAL

a.

Coat the lip of a new transfer adapter oil seal with MP grease.


b.
C456040C01
0.833,0.917 1.333,0.25 1.333,0.25 1.583,0.25 true 1.25,1.083 1.333,0.25 true 1.625,0.167 2.042,0.333 0.417,0.167 10 false SST 2.031,0.813 2.198,0.979 0.167,0.167 10 false *a
*a 0 to 0.5 mm (0 to 0.0197 in.)


Using SST and a hammer, tap in the transfer adapter oil seal.

SST
09950-60011  (09951-00650)
09950-70010  (09951-07150)

Standard Depth:

0 to 0.5 mm (0 to 0.0197 in.)


NOTICE:
·

Make sure that the transfer adapter oil seal is installed in the correct direction.

·

Do not damage the lip of the transfer adapter oil seal.