| ● | Non-reusable part | - | - |
35301B 1.REMOVE FRONT OIL PUMP BODY O-RING
2.SECURE OIL PUMP ASSEMBLY
Place the oil pump assembly on the torque converter assembly.
35617 3.REMOVE CLUTCH DRUM OIL SEAL RING
35314 5.REMOVE FRONT OIL PUMP PLATE
Using a T30 "TORX" socket wrench, remove the 3 screws and front oil pump plate from the oil pump assembly.
35370 6.REMOVE STATOR SHAFT ASSEMBLY
Using a T30 "TORX" socket wrench, remove the 7 screws and stator shaft assembly from the front oil pump body sub-assembly.
35321 9.REMOVE FRONT OIL PUMP DRIVE GEAR
35322 10.REMOVE FRONT OIL PUMP DRIVEN GEAR
35301A 11.REMOVE FRONT OIL PUMP OIL SEAL
Using a screwdriver, remove the front oil pump oil seal from the front oil pump body sub-assembly.
Do not damage the bushing or front oil pump body sub-assembly.
Tape the screwdriver tip before use.