|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
|
Toyota Genuine ATF WS |
|
MP grease |
35301A 1.INSTALL FRONT OIL PUMP OIL SEAL
| *a | -0.3 to 0.3 mm (-0.0118 to 0.0118 in.) | - | - |
Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.
-0.3 to 0.3 mm (-0.0118 to 0.0118 in.)
Coat the lip of the front oil pump oil seal with MP grease.
35301 2.SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY
Place the front oil pump body sub-assembly on the torque converter assembly.
35322 3.INSTALL FRONT OIL PUMP DRIVEN GEAR
35321 4.INSTALL FRONT OIL PUMP DRIVE GEAR
35370 5.INSTALL STATOR SHAFT ASSEMBLY
Align the bolt holes of the stator shaft assembly with the bolt holes of the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.
Using a T30 "TORX" socket wrench, install the 7 screws.
35314 6.INSTALL FRONT OIL PUMP PLATE
Using a T30 "TORX" socket wrench, install the front oil pump plate with the 3 screws.
35617 8.INSTALL CLUTCH DRUM OIL SEAL RING
Coat 2 new clutch drum oil seal rings with ATF and install them to the oil pump assembly.
Do not expand the gap of the clutch drum oil seal rings excessively.
After installing the clutch drum oil seal rings, check that they rotate smoothly.
35301B 9.INSTALL FRONT OIL PUMP BODY O-RING