Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM
RM38G0E _59 Vehicle Exterior _100806 WINDOW / GLASS _0467991 POWER WINDOW CONTROL SYSTEM C

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  B2313  Glass Position Initialization Incomplete  


DESCRIPTION

The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assemblies. The power window regulator motor assembly has motor, regulator and ECU functions.

When the ECU determines that the power window regulator motor assembly has not been initialized, DTC B2313 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B2313 Glass Position Initialization Incomplete
·

Front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) not initialized

·

Front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) is malfunctioning

·

Battery disconnected when ignition switch ON


·

Front power window regulator motor assembly LH not initialized (for LHD)

·

Front power window regulator motor assembly RH not initialized (for RHD)

·

Front power window regulator motor assembly LH (for LHD)

·

Front power window regulator motor assembly RH (for RHD)


D-Door Motor A

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B2313 Glass Position Initialization Incomplete
·

Front power window regulator motor assembly RH (for LHD) or front power window regulator motor assembly LH (for RHD) not initialized

·

Front power window regulator motor assembly RH (for LHD) or front power window regulator motor assembly LH (for RHD) is malfunctioning

·

Battery disconnected when ignition switch ON


·

Front power window regulator motor assembly RH (for LHD) not initialized

·

Front power window regulator motor assembly LH (for RHD) not initialized

·

Front power window regulator motor assembly RH (for LHD)

·

Front power window regulator motor assembly LH (for RHD)


P-Door Motor A

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B2313 Glass Position Initialization Incomplete
·

Rear power window regulator motor assembly LH not initialized

·

Rear power window regulator motor assembly LH is malfunctioning

·

Battery disconnected when ignition switch ON


·

Rear power window regulator motor assembly LH not initialized

·

Rear power window regulator motor assembly LH


RL-Door Motor A

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B2313 Glass Position Initialization Incomplete
·

Rear power window regulator motor assembly RH not initialized

·

Rear power window regulator motor assembly RH is malfunctioning

·

Battery disconnected when ignition switch ON


·

Rear power window regulator motor assembly RH not initialized

·

Rear power window regulator motor assembly RH


RR-Door Motor A

CAUTION / NOTICE / HINT

NOTICE:
·

DTC B2313 is stored in each power window regulator motor assembly.

·

If the battery is disconnected while the ignition switch is ON, DTC B2313 is stored.

·

If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>INITIALIZATION

·

The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING



PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle specifications.


Result:
Result Proceed to
for LHD A
for RHD B



A

2.PERFORM INITIALIZATION (APPLICABLE LOCATION)

B

4.PERFORM INITIALIZATION (APPLICABLE LOCATION)
2.PERFORM INITIALIZATION (APPLICABLE LOCATION)
a.

Turn the ignition switch to ON.


b.

Initialize the power window regulator motor assembly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>INITIALIZATION

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.



Result:
Proceed to
NEXT



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > D-Door Motor > Trouble Codes
50001 124
Body Electrical > P-Door Motor > Trouble Codes
50001 144
Body Electrical > RL-Door Motor > Trouble Codes
50001 146
Body Electrical > RR-Door Motor > Trouble Codes
50001 145
HINT:

Check for DTCs for the power window regulator motor assembly that has DTC B2313 stored in its ECU.



Result:
Result Proceed to
Any D-Door Motor DTCs in the table below are output A
Any P-Door Motor DTCs in the table below are output B
Any RL-Door Motor DTCs in the table below are output C
Any RR-Door Motor DTCs in the table below are output D
No DTCs in the table below are output E


Malfunction Status System Related DTCs
Glass Position Initialization Incomplete D-Door Motor B2313 Glass Position Initialization Incomplete
P-Door Motor B2313 Glass Position Initialization Incomplete
RL-Door Motor B2313 Glass Position Initialization Incomplete
RR-Door Motor B2313 Glass Position Initialization Incomplete


A

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

C

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

D

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

E

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)

4.PERFORM INITIALIZATION (APPLICABLE LOCATION)
a.

Turn the ignition switch to ON.


b.

Initialize the power window regulator motor assembly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>INITIALIZATION

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.



Result:
Proceed to
NEXT



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > D-Door Motor > Trouble Codes
50001 124
Body Electrical > P-Door Motor > Trouble Codes
50001 144
Body Electrical > RL-Door Motor > Trouble Codes
50001 146
Body Electrical > RR-Door Motor > Trouble Codes
50001 145
HINT:

Check for DTCs for the power window regulator motor assembly that has DTC B2313 stored in its ECU.



Result:
Result Proceed to
Any D-Door Motor DTCs in the table below are output A
Any P-Door Motor DTCs in the table below are output B
Any RL-Door Motor DTCs in the table below are output C
Any RR-Door Motor DTCs in the table below are output D
No DTCs in the table below are output E


Malfunction Status System Related DTCs
Glass Position Initialization Incomplete D-Door Motor B2313 Glass Position Initialization Incomplete
P-Door Motor B2313 Glass Position Initialization Incomplete
RL-Door Motor B2313 Glass Position Initialization Incomplete
RR-Door Motor B2313 Glass Position Initialization Incomplete


A

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

C

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

D

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

E

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)