DATA LIST
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Lock Position Switch Status | Front door RH unlock detection switch signal | Unlock or Lock | Unlock: Front door LH unlocked Lock: Front door LH locked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch signal | Unlock or Lock | Unlock: Front door RH unlocked Lock: Front door RH locked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch signal | Unlock or Lock | Unlock: Rear door RH unlocked Lock: Rear door RH locked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch signal | Unlock or Lock | Unlock: Rear door LH unlocked Lock: Rear door LH locked |
- |
| Back Door Lock Position Status | Back door lock position signal | Lock or Unlock | Lock: Back door locked Unlock: Back door unlocked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch assembly RH signal | Close or Open | Close: Front door RH closed Open: Front door RH open |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch assembly LH signal | Close or Open | Close: Front door LH closed Open: Front door LH open |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch assembly RH signal | Close or Open | Close: Rear door RH closed Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch assembly LH signal | Close or Open | Close: Rear door LH closed Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status | Back door courtesy light switch signal | Close or Open | Close: Back door closed Open: Back door open |
- |
| IGR Power | Ignition switch ON signal | OFF or ON | OFF: Ignition switch off ON: Ignition switch ON |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Panel Light Input Signal | Panel light input condition | OFF or ON | OFF: Light control switch not in tail position ON: Light control switch in tail position |
- |
| Panel Light Output Signal | Panel light output condition | OFF or ON | OFF: Light control switch not in tail or head position ON: Light control switch in tail or head position |
- |
| Panel Light Output Current | Panel light current | Min.: 0, Max.: 255 A | Below 3.2 A | Panel light current when output is on |
| Panel Light Fuse Shut Off Status | Panel Light Fuse condition | OFF or ON | OFF: Fuse not shut off ON: Fuse shut off |
- |
| Panel Light Fuse Shut Off Count | Panel light fuse shut off history | Min.: 0, Max.: 255 | Number of fuse shut off displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Start Switch Light Function | Setting for the function to turn on the engine switch illumination or cause it to blink. | OFF or ON | Customized setting displayed | - |
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | OFF or ON | Perform the Active Test with the DOOR switch in the map light assembly and spot light assembly turned on. |
| Front Footwell Lights | Operation of the following lights:
·
No. 1 interior illumination light assembly (front footwell light LH)*2
·
No. 1 interior illumination light assembly (front footwell light RH)*2
·
No. 1 interior illumination light assembly LH (rear footwell light)*3
·
No. 1 interior illumination light assembly RH (rear footwell light)*3 |
OFF or ON | - |
| Extended Illumination 2 | Operation of the following lights:
·
Front door inside handle illumination light assembly LH*2
·
Front door inside handle illumination light assembly RH*2
·
Rear door inside handle illumination light assembly LH*2
·
Rear door inside handle illumination light assembly RH*2 |
OFF or ON | - |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | OFF or ON | When performing this Active Test, turn all the interior lights on.
·
OFF: DOME CUT relay on (interior lights turn on)
·
ON: DOME CUT relay off (interior lights turn off) |
| Dimmer Signal | Outputs night mode (dimmer signal) | OFF or ON | - |
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK
*2: w/ Footwell Light
*3: w/ Rear Footwell Light
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Start SW Light Power Supply | Engine switch illumination | OFF or ON | - |