Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
RM38G0E _51 Engine / Hybrid System _101082 CRUISE CONTROL _0469134 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  P163081  Communication Error from VSC to ECM Invalid Serial Data Received  


DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) sends signals such as brake request signals to the ECM. If an abnormal signal is detected, the ECM stores DTC P163081.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
P163081 Communication Error from VSC to ECM Invalid Serial Data Received When the control system is operating, the ECM detects abnormal data sent from the No. 2 skid control ECU (brake actuator assembly) for 1 second or more.
·

Electronically controlled brake system

·

ECM


Cruise Control B

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the ECM, refer to Service Bulletin.


PROCEDURE

1.CHECK FOR DTCs (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
a.

Check for electronically controlled brake system DTCs.

Chassis > Brake Booster > Trouble Codes
50001 466
Chassis > Brake/EPB > Trouble Codes
50001 435

Result:
Result Proceed to
Electronically controlled brake system DTCs are not output A
Electronically controlled brake system DTCs are output B



A

2.CHECK FOR DTCs (Cruise Control)

B

2.CHECK FOR DTCs (Cruise Control)

Pre-procedure1

a.

Clear the DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 374

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

c.

Check for DTCs.

Powertrain > Cruise Control > Trouble Codes
50001 374
Result:
Result Proceed to
DTC P163081 is not output A
DTC P163081 is output B



Post-procedure1

d.

None



A

B