TELEPHONE TRANSCEIVER ASSEMBLY
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I55-1 (+B) - I55-20 (E) | Power source (+B) | Always | 11 to 14 V |
| I55-3 (SIG-) - I55-20 (E) | Ground | Always | Below 1 Ω |
| I55-4 (IND1) - I55-20 (E) | Manual (SOS) switch red indicator illumination signal | For 10 seconds after turning the ignition switch to ON | 1 to 8.5 V |
| Ignition switch off | Below 1 V | ||
| I55-5 (MCVD) - I55-20 (E) | Receive microphone voice signal | Voice being input to built-in microphone of communication telematics box | A waveform synchronized with microphone voice signal is input |
| I55-6 (MCI+) - I55-20 (E) | Microphone voice signal | Voice being input to telephone microphone assembly | A waveform synchronized with microphone voice signal is input |
| I55-7 (MCI-) - I55-20 (E) | Microphone voice signal | Always | Below 1 V |
| I55-8 (MCMD) - I55-20 (E) | Microphone mode signal | Microphone mode | 0.6 V or higher |
| Emergency call mode | 0.5 V or less | ||
| I55-13 (GSW) - I55-20 (E) | Collision detection signal | Ignition switch ON | Pulse generation (Refer to waveform 1) |
| I55-14 (MUTE) - I55-20 (E) | MUTE Signal | Emergency call mode | Below 1 V |
| I55-18 (SP+) - I55-20(E) | Sound signal | Sound being output from built-in speaker of communication telematics box | A waveform synchronized with sound signals is output |
| I55-19 (IG2) - I55-20 (E) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| I55-20 (E) - Body ground | Ground | Always | Below 1 Ω |
| I55-21 (SIG1) - I55-3 (SIG-) | Manual (SOS) switch button condition signal | Manual (SOS) switch not pressed | 1.3 to 1.9 V |
| Manual (SOS) switch pressed | 0.5 to 0.8 V | ||
| I55-22 (IND2) - I55-20 (E) | Manual (SOS) switch green indicator illumination signal | For 2 seconds after the ignition switch is turned to ON and the manual (SOS) switch indicator (red) has illuminated for 10 seconds. | 1 to 8.5 V |
| Ignition switch off | Below 1 V | ||
| I55-23 (SGND) - I55-20 (E) | Shield ground | Always | Below 1 Ω |
| I55-24 (MICV) - I55-20 (E) | Communication telematics box power supply | Ignition switch ON | 4 to 6 V |
| Ignition switch off | Below 1 V | ||
| I55-25 (CANP) | CAN communication signal | - | - |
| I55-26 (CANN) | CAN communication signal | - | - |
| I55-34 (SP-) - I55-20(E) | Sound signal | Sound being output from built-in speaker of communication telematics box | A waveform synchronized with sound signals is output |
Oscilloscope waveform:
Waveform 1
| Item | Condition |
|---|---|
| Tester connection | I55-13 (GSW) - I55-20 (E) |
| Tool setting | 5.0 V/DIV, 20 ms./DIV |
| Vehicle condition | Ignition switch ON |
RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio and Visual System [for Radio and Display Type, except 12.3 Inch Display])
CHECK STEREO COMPONENT AMPLIFIER ASSEMBLY
w/ Navigation System: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU
w/ Audio and Visual System (for Radio and Display Type, for 12.3 Inch Display): Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)>TERMINALS OF ECU