Check from the rear of the connector while it is connected to the components.
RADIO AND DISPLAY RECEIVER ASSEMBLY
| *A | w/ DAB Function | - | - |
*1: w/o Telematics Transceiver
*2: w/ Parking Assist Monitor System or w/ Rear View Monitor System
*3: w/ Active Noise Control System
*4: w/o Stop and Start System
*5: w/ Stop and Start System
| *a | Waveform 1 (camera lens not covered, displaying image) |
| *b | Waveform 2 (camera lens covered, blacking out screen) |
| *c | Synchronization Signal |
| *d | Video Waveform |
Reference (Oscilloscope waveform):
Waveform 1 (camera lens is not covered, displaying an image)
| Item | Content |
|---|---|
| Measurement terminal | I13-28 (V+) - I13-29 (V-) |
| Measurement setting | 200 mV/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON, shift position in R, camera lens not covered, displaying image |
The video waveform changes according to the image sent by the rear television camera assembly.
The video waveform is constantly output when the ignition switch is ACC.
Waveform 2 (camera lens is covered, blacking out the screen)
| Item | Content |
|---|---|
| Measurement terminal | I13-28 (V+) - I13-29 (V-) |
| Measurement setting | 200 mV/DIV., 50 μs./DIV. |
| Condition | Ignition switch ON, shift position in R, camera lens covered, blacking out screen |
The video waveform changes according to the image sent by the rear television camera assembly.
The video waveform is constantly output when the ignition switch is ACC.
TELEPHONE TRANSCEIVER ASSEMBLY (w/ Telematics Transceiver)
for eCell: Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for eCall)>TERMINALS OF ECU
for ERA-GLONASS: Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for ERA-GLONASS)>TERMINALS OF ECU
COMBINATION METER ASSEMBLY
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>TERMINALS OF ECU