Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM38G0E _54 Brake _100463 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0469467 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Note
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage 9.5 to 17.4 V, the No. 2 skid control ECU (brake actuator assembly) receives an error signal from the steering sensor. Steering sensor Brake/EPB Output ECU: No. 2 skid control ECU (brake actuator assembly)

PROCEDURE

1.REPLACE STEERING SENSOR

NEXT

END