This DTC is stored when the blind spot monitor sensor LH (B) detects an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| C1AB604 | Rear Side Radar Sensor (Module "B") System Internal Failure | The blind spot monitor sensor LH (B) detects an internal malfunction | Blind spot monitor sensor LH (B) | Blind Spot Monitor "B" | A |
When checking for DTCs, make sure that the blind spot monitor system is turned on.
Check for DTCs.
| Result | Proceed to |
|---|---|
| C1AB604 is not output | A |
| C1AB604 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B