| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PURGE VSV (DUTY VACUUM SWITCHING VALVE) | 17650G | ( ) |
- | - |
| *1 | NO. 2 FUEL VAPOR FEED HOSE | *2 | NO. 3 FUEL VAPOR FEED HOSE |
| *3 | NO. 4 FUEL VAPOR FEED HOSE | - | - |
17650G 1.INSTALL PURGE VSV (DUTY VACUUM SWITCHING VALVE)
| *1 | No. 2 Fuel Vapor Feed Hose | *2 | No. 3 Fuel Vapor Feed Hose |
| *3 | No. 4 Fuel Vapor Feed Hose | - | - |
| *a | Paint Mark | *b | 45° |
| *c | Upper Side | - | - |
Install the purge VSV (duty vacuum switching valve) to the fuel vapor feed pipe.
Connect the No. 2 fuel vapor feed hose and No. 3 fuel vapor feed hose to the purge VSV (duty vacuum switching valve) and slide the hose clip to secure it.
Align the hose and the hose clip at the locations shown in the illustration and install them.
Connect the connector.