| *1 | WIRE HARNESS | - | - |
11209 1.REMOVE V-BANK COVER SUB-ASSEMBLY
17700L 2.REMOVE AIR CLEANER ASSEMBLY RH WITH AIR CLEANER HOSE ASSEMBLY RH
17800 3.REMOVE AIR CLEANER ASSEMBLY LH WITH AIR CLEANER HOSE ASSEMBLY LH
17670B 4.REMOVE AIR BY-PASS VALVE ASSEMBLY
for Bank 1:
Disconnect the 3 connectors.
Remove the 3 bolts and disconnect the wire harness.
Using a T30 "TORX" socket wrench, remove the 3 bolts and air by-pass valve assembly.
Replace with a new air by-pass valve assembly if the air by-pass valve assembly is dropped or subjected to a strong impact.
for Bank 2:
Disconnect the connector.
Using a T30 "TORX" socket wrench, remove the 3 bolts and air by-pass valve assembly.
Replace with a new air by-pass valve assembly if the air by-pass valve assembly is dropped or subjected to a strong impact.