| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | TAIL EXHAUST PIPE ASSEMBLY | 17430 | ( ) |
- | - |
| 2 | FRONT AND CENTER EXHAUST PIPE ASSEMBLY | - | ( ) |
- | - |
| 3 | EXHAUST PIPE DAMPER | 17581A | ( ) |
- | - |
| *1 | FRONT EXHAUST PIPE ASSEMBLY | *2 | CENTER EXHAUST PIPE ASSEMBLY |
| *3 | COMPRESSION SPRING | *4 | EXHAUST PIPE SUPPORT |
| ● | Non-reusable part | - | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the exhaust pipe removal/installation are shown below.
To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
17430 1.REMOVE TAIL EXHAUST PIPE ASSEMBLY
|
|
2.REMOVE FRONT AND CENTER EXHAUST PIPE ASSEMBLY
|
|
17581A 3.REMOVE EXHAUST PIPE DAMPER
|
|