| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) | 12204 | ( ) |
- | - |
| *1 | VENTILATION HOSE | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
|
Adhesive 1324 |
| ★ | Precoated part | - | - |
12204 1.INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
| *a | Paint Mark | *b | 180° |
| *c | 45° | *d | Front Side |
| *e | LH Side | - | - |
Apply adhesive to the PCV valve (ventilation valve sub-assembly).
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Using a 19 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly).
Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the hose clip to secure it.
Align the hose and the hose clip at the locations shown in the illustration and install them.
Make sure the fuel vapor feed hose is securely inserted to the stopper.