Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100728 PARK ASSIST / MONITORING _0469676 PANORAMIC VIEW MONITOR SYSTEM C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module "A" Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U016387  Lost Communication with Navigation Control Module Missing Message  U023387  Lost Communication with Side Obstacle Detection Control Module "B" Missing Message  U026587  Lost Communication with Image Processing Sensor A Missing Message  U111087  Lost Communication with Clearance Sonar Module Missing Message  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U010087 Lost Communication with ECM/PCM "A" Missing Message Lost communication with ECM CAN communication system Circumference Monitoring Camera Control Module B
U012687 Lost Communication with Steering Angle Sensor Module Missing Message Lost communication with steering sensor CAN communication system Circumference Monitoring Camera Control Module B
U012987 Lost Communication with Brake System Control Module "A" Missing Message Lost communication with No. 2 skid control ECU CAN communication system Circumference Monitoring Camera Control Module B
U014087 Lost Communication with Body Control Module Missing Message Lost communication with main body ECU (multiplex network body ECU) CAN communication system Circumference Monitoring Camera Control Module B
U016387 Lost Communication with Navigation Control Module Missing Message Lost communication with radio receiver assembly CAN communication system Circumference Monitoring Camera Control Module B
U023387 Lost Communication with Side Obstacle Detection Control Module "B" Missing Message Lost communication with blind spot monitor sensor LH CAN communication system Circumference Monitoring Camera Control Module B
U026587 Lost Communication with Image Processing Sensor A Missing Message Lost communication with rear television camera assembly CAN communication system Circumference Monitoring Camera Control Module B
U111087 Lost Communication with Clearance Sonar Module Missing Message Lost communication with clearance warning ECU assembly CAN communication system Circumference Monitoring Camera Control Module B

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 470

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 470
HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>PROBLEM SYMPTOMS TABLE




Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B