Home › Suspension › SUSPENSION CONTROL › ELECTRONIC-KINETIC DYNAMIC SUSPENSION SYSTEM
RM38G0E _53 Suspension _100546 SUSPENSION CONTROL _0470891 ELECTRONIC-KINETIC DYNAMIC SUSPENSION SYSTEM C

SUSPENSION CONTROL  ELECTRONIC-KINETIC DYNAMIC SUSPENSION SYSTEM  U030057  Internal Control Module Software Incompatibility Invalid / Incompatible Software Component  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U030057 Internal Control Module Software Incompatibility Invalid / Incompatible Software Component ECM information does not match the stored value in the stabilizer control ECU
·

ECM

·

Stabilizer control ECU


Electronic-Kinetic Dynamic Suspension System (E-KDSS)

PROCEDURE

1.CHECK ECM
a.

If a DTC is output due to replacement of the ECM, check if a part with the correct part number is installed.

NOTICE:

When removing the part to check the ECM, be sure to follow the removal and installation procedures and precautions.



Result:
Result Proceed to
Part with incorrect part number is installed A
Part with correct part number is installed, or part has not been replaced B



A

REPLACE ECM (REPLACE WITH ECM WITH CORRECT PART NUMBER)

B

REPLACE STABILIZER CONTROL ECU