Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM38G0E _52 Drivetrain _100435 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0473273 SHIFT LEVER KNOB A

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C456032N02
5.333,1.5 5.583,1.5 false 6,1.417 6.333,1.917 0.333,0.5 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 SHIFT LEVER KNOB SUB-ASSEMBLY 33504F (Click here) - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C456034N03
0.167,0.042 0.5,0.458 0.333,0.417 18 false i 3.667,0.042 4,0.458 0.333,0.417 18 false ii

i.

Disengage the claw to disconnect the shifting hole cover sub-assembly as shown in the illustration.


ii.

Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the floor shift lever assembly as shown in the illustration.

NOTICE:
·

Be careful not to damage the shift lever knob sub-assembly.

·

The clip is difficult to remove. Check that the clip is installed to the shift lever knob sub-assembly after removing the shift lever knob sub-assembly.

·

If the installation procedures described in the repair manual are not performed correctly, the shift lever knob sub-assembly may fall off.