| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT LOWER NO. 1 ARM BUSH | 48654F | ( ) |
- | - |
| 2 | FRONT LOWER NO. 2 ARM BUSH | 48655E | ( ) |
- | - |
| *1 | FRONT LOWER NO. 1 SUSPENSION ARM LH | - | - |
|
MP Grease | ● | Non-reusable part |
48654F 1.INSTALL FRONT LOWER NO. 1 ARM BUSH
| *1 | Bush Positioning Protrusion | - | - |
Using SST and a press, press in a new front lower No. 1 arm bush.
Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.
48655E 2.INSTALL FRONT LOWER NO. 2 ARM BUSH
| *1 | MP grease | - | - |
Using SST and a press, press in a new front lower No. 2 arm bush.
Apply MP grease to the locations shown in the illustration.
Do not apply MP grease to the tapered or threaded parts of the ball joint.