Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)
RM38G0E _56 Audio / Visual / Telematics _100606 AUDIO / VIDEO _0467496 AUDIO AND VISUAL SYSTEM(for Radio and Display Type, for 12.3 Inch Display) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type, for 12.3 Inch Display)  B153A  GVIF Disconnected (from Extension Module to H/U)  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B153A GVIF Disconnected (from Extension Module to H/U) GVIF disconnected (from navigation ECU assembly to radio receiver assembly)
·

Harness or connector

·

Navigation ECU assembly

·

Radio receiver assembly


Navigation System A

WIRING DIAGRAM

E393030E13
0.813,2.229 1.25,2.438 0.438,0.208 10 false I158 0.813,2.385 2.573,2.594 1.76,0.208 10 false Navigation ECU Assembly 0.906,3.375 1.854,3.625 0.948,0.25 10 false : GVIF Cable 5.094,2.167 5.552,2.375 0.458,0.208 10 false I157 5.094,2.333 6.76,2.604 1.667,0.271 10 false Radio Receiver Assembly 5.479,0.833 5.958,1.042 0.479,0.208 10 false GV2+ 5.479,1.76 5.958,1.969 0.479,0.208 10 false GVG2 1.302,0.844 1.781,1.052 0.479,0.208 10 false GVO+ 1.292,1.75 1.771,1.958 0.479,0.208 10 false GVG1 1.792,0.688 2.177,0.896 0.385,0.208 10 false 2 1.781,1.115 2.167,1.323 0.385,0.208 10 false 1 1.792,1.625 2.177,1.833 0.385,0.208 10 false 3 1.313,1.292 1.792,1.5 0.479,0.208 10 false GVO- 5.479,1.292 5.958,1.5 0.479,0.208 10 false GV2- 5.26,0.708 5.646,0.917 0.385,0.208 10 false 2 5.271,1.156 5.656,1.365 0.385,0.208 10 false 1 5.271,1.646 5.656,1.854 0.385,0.208 10 false 3 3.531,1.615 3.99,1.823 0.458,0.208 10 false * 5.208,3.302 6.156,3.542 0.948,0.24 10 false *: Shielded

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)>PRECAUTION


PROCEDURE

1.CHECK DTC

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

Procedure1

b.

Press the "MAP" switch and check for DTCs.

Body Electrical > Navigation System > Trouble Codes
50001 212
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

B

2.CHECK HARNESS OR CONNECTOR (RADIO RECEIVER ASSEMBLY - NAVIGATION ECU ASSEMBLY)
2.CHECK HARNESS OR CONNECTOR (RADIO RECEIVER ASSEMBLY - NAVIGATION ECU ASSEMBLY)

Pre-procedure1

a.

Disconnect the I157 radio receiver assembly connector.


b.

Disconnect the I158 navigation ECU assembly connector.


Procedure1

c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(I157,I158)Location & Routing

Click Connector(I157)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Radio Receiver Assembly

Click Connector(I158)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Navigation ECU Assembly

I157-1 (GV2-) - I158-1 (GVO-) Always Below 1 Ω
I157-2 (GV2+) - I158-2 (GVO+) Always Below 1 Ω
I157-3 (GVG2) - I158-3 (GVG1) Always Below 1 Ω


Result:
Proceed to
OK
NG



Post-procedure1

d.

None



OK

3.REPLACE NAVIGATION ECU ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.REPLACE NAVIGATION ECU ASSEMBLY
a.

Replace the navigation ECU assembly with a new or known good one.

HINT:

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION ECU>REMOVAL



Result:
Proceed to
NEXT



NEXT

4.CHECK DTC
4.CHECK DTC

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

Procedure1

b.

Press the "MAP" switch and check for DTCs.

Body Electrical > Navigation System > Trouble Codes
50001 212
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

END (NAVIGATION ECU ASSEMBLY IS DEFECTIVE)

B