Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)
RM38G0E _56 Audio / Visual / Telematics _100606 AUDIO / VIDEO _0467496 AUDIO AND VISUAL SYSTEM(for Radio and Display Type, for 12.3 Inch Display) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type, for 12.3 Inch Display)  CD/DVD Sound Skips  


CAUTION / NOTICE / HINT

HINT:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)>PRECAUTION


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

END (DISC IS DEFECTIVE)

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
OK
NG



OK

3.REPLACE DISC AND RECHECK

NG

CLEAN DISC

3.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (DISC IS DEFECTIVE)

NG

4.CHECK RADIO RECEIVER ASSEMBLY
4.CHECK RADIO RECEIVER ASSEMBLY
a.

Check the radio receiver assembly installation condition.

i.

Check that the radio receiver assembly is properly installed.

OK:

The radio receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

NG