| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PURGE VSV (NO. 1 VACUUM SWITCHING VALVE ASSEMBLY) | 25860 | - | - | - |
| 2 | NO. 2 AIR TUBE | 17362 | ( ) |
- | - |
| 3 | NO. 2 EMISSION CONTROL VALVE SET | 25702B | - | - | - |
| *1 | NO. 2 AIR TUBE GASKET | *2 | AIR TUBE ASSEMBLY |
| ● | Non-reusable part | - | - |
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
25860 1.REMOVE PURGE VSV (NO. 1 VACUUM SWITCHING VALVE ASSEMBLY)
17362 2.REMOVE NO. 2 AIR TUBE
Remove the 2 bolts, 2 nuts, and No. 2 air tube.
Be careful not to damage the installation surface of the gaskets.
Remove the 2 No. 2 air tube gaskets.
25702B 3.REMOVE NO. 2 EMISSION CONTROL VALVE SET