Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat) › from 2021.07
RM38G0E _58 Vehicle Interior _100628 SEAT _0468278 REAR NO. 2 SEAT ASSEMBLY(for Manual Seat) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Seat)  REASSEMBLY  


CAUTION / NOTICE / HINT

COMPONENTS (REASSEMBLY)
B621022N05
1.458,0.042 2.292,0.292 0.833,0.25 1.5,0.083 2.25,0.25 0.75,0.167 4.583,0.167 7,1.083 2.417,0.917 4.583,1.167 7,2.083 2.417,0.917 4.167,0.083 7.083,2.167 2.917,2.083 2.167,0.698 2.667,0.698 false 2.25,0.167 2.521,0.167 2.521,0.167 2.771,0.167 false 5.969,0.625 6.469,0.625 false 5.083,1.5 5.75,1.5 false 1.917,2.083 2.417,2.083 false 3.917,3.5 4.833,3.5 false 2,3.083 2.885,3.083 false 5.833,0.479 6.115,0.833 0.281,0.354 18 false 1 5.74,1.365 6.021,1.719 0.281,0.354 18 false 1 2.021,0.573 2.302,0.927 0.281,0.354 18 false 2 1.75,1.927 2.031,2.281 0.281,0.354 18 false 3 3.76,3.344 4.042,3.698 0.281,0.354 18 false 4 1.854,2.99 2.167,3.188 0.313,0.198 10 false *1 2.854,0.188 3.167,0.385 0.313,0.198 10 false x 4 1.583,0.094 3.052,0.25 1.469,0.156 8 false 25 (255, 18) 4.667,1.25 5,1.5 0.333,0.25 12 false *C 4.667,0.25 5,0.5 0.333,0.25 12 false *B 4.25,0.167 4.583,0.417 0.333,0.25 12 false *A

Procedure Part Name Code
Z101186

Z101188

Z101187

1 REAR NO. 2 SEAT WIRE LH 82196 - - -
2 NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH 79202B (Click here) - -
3 REAR NO. 2 SEAT LOWER CUSHION HINGE COVER RH 71693Q - - -
4 REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH 71694J - - -

*A w/ Seat Belt Warning System *B w/o Occupant Detection Sensor
*C w/ Occupant Detection Sensor - -
*1 REAR NO. 2 SEAT LEG ASSEMBLY LH - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) - -

B624613N01
3.25,0.167 6.167,1.781 2.917,1.615 5.417,1.833 7.083,2.583 1.667,0.75 6.302,3.5 6.302,3.354 false 6.49,3.5 5.646,3.5 5.646,3.5 5.646,3 false 6.292,2.729 6.292,3.083 false 5.656,2.729 6.49,2.729 false 4.771,3.385 5.094,3.385 false 0.865,3 1.01,3 1.01,3 1.24,3 false 0.833,2.427 1.042,2.427 1.042,2.427 1.26,2.427 false 2.135,1.979 2.406,1.979 2.406,1.979 2.688,1.979 false 4.906,0.615 5.625,0.615 false 6.167,1 6.385,1 false 4.792,1.531 5.406,1.531 false 1.479,3.635 1.271,3.635 1.271,3.635 1.271,3.417 false 3.885,3.031 4.188,3.031 4.188,3.031 4.656,3.031 false 0.979,2.146 1.135,2.146 1.135,2.146 1.479,2.146 false 2.635,2.844 2.823,2.844 2.823,2.844 3.031,2.844 false 1.854,3.156 1.958,3.146 1.958,3.146 2.24,3.146 false 6,2.479 6,2.021 6,2.021 6.24,2.021 false 3.917,3.042 4.229,3.25 0.313,0.208 10 false x 4 1.573,2.031 1.865,2.229 0.292,0.198 10 false x 2 1.385,3.375 1.74,3.573 0.354,0.198 10 false x 2 6.417,0.833 6.75,1.188 0.333,0.354 18 false 6 3.063,2.729 3.396,3.083 0.333,0.354 18 false 11 2.25,3.021 2.927,3.396 0.677,0.375 18 false 10 6.51,2.594 6.802,2.885 0.292,0.292 18 false 13 6.5,3.354 6.823,3.646 0.323,0.292 18 false 14 2.708,1.844 3.01,2.167 0.302,0.323 18 false 8 5.094,3.229 5.646,3.583 0.552,0.354 18 false 7 5.865,0.5 6.177,0.875 0.313,0.375 18 false 5 5.427,1.438 5.74,1.635 0.313,0.198 10 false *1 1.521,3.531 1.698,3.76 0.177,0.229 10 false ● 4.698,2.938 4.854,3.135 0.156,0.198 10 false ● 0.875,2.042 1.031,2.24 0.156,0.198 10 false ● 1.271,2.906 1.427,3.104 0.156,0.198 10 false ● 0.844,3.042 1.302,3.24 0.458,0.198 10 false x 2 1.313,2.271 1.677,2.625 0.365,0.354 18 false 9 6.479,1.875 6.802,2.167 0.323,0.292 18 false 12 6.406,1.917 6.563,2.115 0.156,0.198 10 false ● 5.5,1.896 5.833,2.25 0.333,0.354 12 false *A

Procedure Part Name Code
Z101186

Z101188

Z101187

5 NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH 79022B (Click here) - -
6 SEAT CUSHION COVER WITH PAD - - - -
7 NO. 2 SEAT CUSHION UNDER CARPET LH 79347A - - -
8 REAR NO. 2 SEAT CUSHION UNDER COVER LH 72928F - - -
9 REAR SEAT CUSHION COVER LH 72998D - - -
10 REAR NO. 2 SEAT CUSHION CARPET 79225D - - -
11 NO. 2 SEAT LEG COVER LH 79246H - - -
12 LH SEAT REAR SEAT PLATE 71779E (Click here) - -
13 NO. 2 SEAT ADJUSTER COVER CAP LH 71849M - - -
14 NO. 2 SEAT LEG BUSH 72622D - - -

*A w/ Plate - -
*1 NO. 2 SEAT CUSHION PAD LH - -
● Non-reusable part - -

B624547N02
5.708,0.375 6.417,0.604 0.708,0.229 5.646,0.323 6.479,0.667 0.833,0.344 3.354,0.594 3.49,0.354 3.49,0.354 3.667,0.354 false 5.927,0.99 6.427,0.99 false 4.604,0.25 4.99,0.25 false 4.49,2.646 4.948,2.646 false 2.958,3.198 3.417,3.198 false 2.302,2.813 2.74,2.542 2.74,2.542 3.073,2.542 false 0.667,1.792 0.792,1.469 0.792,1.469 0.99,1.469 false 1.094,2.844 1.219,3.208 1.219,3.208 1.448,3.208 false 2.594,1.938 3.49,1.938 false 5.26,0.917 5.26,0.5 5.26,0.5 5.708,0.5 false 3.583,1.271 3.792,1.521 3.792,1.521 4.156,1.521 false 5.323,0.865 5.781,1.063 0.458,0.198 10 false x 3 3.458,3.052 4.01,3.406 0.552,0.354 18 false 19 3.115,2.385 3.667,2.74 0.552,0.354 18 false 20 1.031,1.313 1.583,1.667 0.552,0.354 18 false 21 1.469,3.073 2.021,3.427 0.552,0.354 18 false 22 3.854,0.208 4.26,0.552 0.406,0.344 18 false 18 4.99,0.104 5.542,0.458 0.552,0.354 18 false 17 6.656,0.854 7,1.177 0.344,0.323 18 false 16 5.146,2.521 5.521,2.854 0.375,0.333 18 false 15 3.542,1.854 3.917,2.094 0.375,0.24 10 false *1 5.75,0.427 6.5,0.583 0.75,0.156 8 false 21 (214, 15) 4.24,1.427 4.396,1.625 0.156,0.198 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

15 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY LH 78910D (Click here) - -
16 REAR SEAT LOCK RELEASE STRAP ASSEMBLY 72690K (Click here) - -
17 NO. 2 SEAT HEADREST ASSEMBLY LH 71940J - - -
18 REAR SEAT HEADREST CABLE 71987H (Click here) - -
19 REAR NO. 2 SEAT NO. 4 RECLINING COVER LH 71844P - - -
20 REAR NO. 2 SEAT NO. 3 RECLINING COVER LH 71834N - - -
21 REAR NO. 2 SEAT NO. 2 RECLINING COVER LH 71843Q - - -
22 REAR NO. 2 SEAT NO. 1 RECLINING COVER LH 71833N - - -

*1 NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) ● Non-reusable part

B621059N02
5.635,3.438 6.594,3.656 0.958,0.219 4.167,0.49 4.167,0.24 4.167,0.24 4.688,0.24 false 6.469,0.458 6.531,0.271 6.531,0.271 6.729,0.271 false 0.583,1.667 0.771,1 0.771,1 1.031,1 false 2.229,3.927 1.896,3.927 1.896,3.927 1.896,3.188 false 2.969,2.021 3.208,1.531 3.208,1.531 3.406,1.531 false 5.073,3.833 5.5,3.833 5.5,3.833 5.5,3.021 false 6.469,2.135 6.563,1.604 6.563,1.604 6.76,1.604 false 3.26,1.021 3.26,0.865 3.26,0.865 3.896,0.865 false 6.594,3.542 6.938,3.542 6.938,3.542 6.938,2.094 false 4.385,0.542 4.385,0.24 false 3.74,1.292 3.74,0.865 false 5.427,0.844 5.427,0.448 5.427,0.448 5.656,0.448 false 3.563,1.188 3.563,0.875 false 3.417,1.115 3.417,0.865 false 3.906,0.708 4.458,1.063 0.552,0.354 18 false 23 3.427,1.396 3.979,1.75 0.552,0.354 18 false 24 1.271,0.854 1.823,1.208 0.552,0.354 18 false 25 5,0.125 5.365,0.427 0.365,0.302 18 false 27 4.802,3.708 5.354,4.063 0.552,0.354 18 false 28 5.917,0.323 6.469,0.677 0.552,0.354 18 false 29 6.75,0.146 7.125,0.5 0.375,0.354 18 false 30 6.823,1.479 7.115,1.813 0.292,0.333 18 false 31 6.031,0.719 6.49,0.917 0.458,0.198 10 false x 2 5.677,3.469 6.635,3.615 0.958,0.146 8 false 6.0 (61, 53 in.*lbf) 2.24,3.792 2.583,4.125 0.344,0.333 18 false 26 4.896,0.146 5.219,0.417 0.323,0.271 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

23 REAR SEAT BACK PROTECTOR 71697M - - -
24 REAR HEADREST COVER LH 72985A - - -
25 NO. 2 SEATBACK COVER SUB-ASSEMBLY LH 79024D (Click here) - -
26 NO. 2 SEATBACK PAD LH 79285C - - -
27 SEATBACK LOCK HOOK 72635D (Click here) - -
28 NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH 79207C - - -
29 REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH 72057K (Click here) - -
30 REAR SEATBACK LOCK STRIKER COVER 72615P - - -
31 ROPE HOOK ASSEMBLY 66310P - - -

V100146

N*m (kgf*cm, ft.*lbf) : Specified torque ● Non-reusable part

B624595N02
1.292,2.906 3.125,4.313 1.833,1.406 0.917,1.813 1.594,2 0.677,0.188 0.885,1.771 1.625,2.052 0.74,0.281 6.354,3.375 7.104,3.542 0.75,0.167 6.302,3.333 7.135,3.583 0.833,0.25 5.927,0.542 6.094,0.323 6.094,0.323 6.302,0.323 false 4.042,1.781 4.042,1.479 4.042,1.479 4.302,1.479 false 5.25,4.344 5.656,4.344 5.656,4.344 5.885,4.344 false 1.813,3.667 2.125,3.667 2.125,3.667 2.51,3.667 false 1.271,1.802 1.271,1.5 false 2.063,2.063 1.75,2.063 1.75,2.063 1.75,1.729 false 6.719,3.375 6.719,3.188 false 6.51,0.198 6.927,0.563 0.417,0.365 18 false 32 4.323,1.344 4.875,1.698 0.552,0.354 18 false 33 6.813,3.031 7.083,3.219 0.271,0.188 10 false x 4 4.979,4.219 5.385,4.51 0.406,0.292 18 false 35 1.365,2.99 1.625,3.219 0.26,0.229 12 false *A 2.521,3.531 3.073,3.885 0.552,0.354 18 false 36 2.271,1.938 2.823,2.292 0.552,0.354 18 false 34 0.948,1.833 1.708,2.021 0.76,0.188 8 false 42 (428, 31) 6.406,3.385 7.094,3.552 0.688,0.167 8 false 60 (612, 44)

Procedure Part Name Code
Z101186

Z101188

Z101187

32 NO. 2 SEATBACK ASSEMBLY LH - - - -
33 REAR NO. 2 SEAT UPPER CUSHION HINGE COVER LH 71692M - - -
34 REAR NO. 2 SEAT INNER BELT ASSEMBLY LH 73590 (Click here) - -
35 REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH 71694J - - -
36 CENTER PROTECTOR COVER 74865H - - -

*A for RH Seat - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) - -

CAUTION:
·
B543257


·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 82196 1.INSTALL REAR NO. 2 SEAT WIRE LH (w/ Seat Belt Warning System)

Hide 79202B 2.INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH

a.
B624590C01
0.385,0.073 0.667,0.427 0.281,0.354 18 false i

i.

Using a T40 "TORX" socket wrench, install the 4 "TORX" bolts and No. 2 seat cushion frame sub-assembly LH.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)



Hide 71693Q 3.INSTALL REAR NO. 2 SEAT LOWER CUSHION HINGE COVER RH

Hide 71694J 4.INSTALL REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH

Hide 79022B 5.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

Z101186

NOTICE:

Be careful not to dirty or damage the No. 2 seat cushion cover sub-assembly LH and rear seat cushion pad LH.


HINT:

When installing a No. 2 seat cushion cover sub-assembly LH, refer to Precaution in order to prevent wrinkles from forming.

(Click here)



Hide 6.INSTALL SEAT CUSHION COVER WITH PAD

Hide 79347A 7.INSTALL NO. 2 SEAT CUSHION UNDER CARPET LH

Hide 72928F 8.INSTALL REAR NO. 2 SEAT CUSHION UNDER COVER LH

Hide 72998D 9.INSTALL REAR SEAT CUSHION COVER LH

Hide 79225D 10.INSTALL REAR NO. 2 SEAT CUSHION CARPET

Hide 79246H 11.INSTALL NO. 2 SEAT LEG COVER LH

Hide 71779E 12.INSTALL LH SEAT REAR SEAT PLATE (w/ Plate)

Z101186

NOTICE:

When installing the LH seat rear seat plate, heat the LH seat rear seat plate and rear No. 2 seat leg assembly LH using a heat light.


HINT:

When installing a new rear No. 2 seat leg assembly LH, it is not necessary to install the LH seat rear seat plate.



Standard Value:
Part Temperature
Rear No. 2 Seat Leg Assembly LH 20 to 30°C (68 to 86°F)
LH seat rear seat plate


CAUTION:
E306500C35
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the LH seat rear seat plate and rear No. 2 seat leg assembly LH excessively.


a.
B624609C01
0.771,1.896 0.927,2.177 0.156,0.281 18 true i 0.781,2.719 0.948,3.01 0.167,0.292 18 true ii 4.26,0.896 4.49,1.177 0.229,0.281 18 true iii

i.

Clean the rear No. 2 seat leg assembly LH surface.

1. When reusing the rear No. 2 seat leg assembly LH, remove remaining double-sided tape from the rear No. 2 seat leg assembly LH.

2. Using a heat light, heat the rear No. 2 seat assembly LH surface.

3. Remove any remaining double-sided tape from the rear No. 2 seat leg assembly LH and wipe off any tape adhesive residue with cleaner.

4. Clean the surface.

NOTICE:
·

Installing the LH seat rear seat plate with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.

·

Also, clean a new rear No. 2 seat leg assembly LH surface.




ii.

Using a heat light, heat the rear No. 2 seat leg assembly LH and a new LH seat rear seat plate.


iii.

Install the LH seat rear seat plate in the position shown in the illustration.

NOTICE:
·

The application strength of the front bumper pad will weaken if reapplied. If reapplication is necessary, be sure to replace it with a new one.

·

Do not overlapping holes.



HINT:

Apply pressure so that it does not lift up from the rear No. 2 seat leg assembly LH.




Hide 71849M 13.INSTALL NO. 2 SEAT ADJUSTER COVER CAP LH

Hide 72622D 14.INSTALL REAR NO. 2 SEAT LEG BUSH

Hide 78910D 15.INSTALL FOLD SEAT LOCK CONTROL CABLE ASSEMBLY LH

a.
B647206C01
5.417,2.083 5.583,2.083 5.583,2.083 5.771,2.302 true 2.156,0.688 2.438,1.042 0.281,0.354 18 false ii 6.302,1.75 6.5,2.083 0.198,0.333 18 true i 5.26,1.979 5.573,2.177 0.313,0.198 10 false *a
*a Cable End - -
V113147

Install in this Direction - -


i.

Twist the cable end as shown in the illustration and install the fold seat lock control cable assembly LH.


ii.

Attach the clamp.



Hide 72690K 16.INSTALL REAR SEAT LOCK RELEASE STRAP ASSEMBLY

a.
B647212C01
0.417,2 0.635,2 0.635,2 0.885,1 true 4.25,1.396 4.531,1.75 0.281,0.354 18 false ii 3.052,1.146 3.333,1.5 0.281,0.354 18 false i 0.802,2.063 1.083,2.417 0.281,0.354 18 false ii 0.25,1.917 0.563,2.115 0.313,0.198 10 false *a
*a Cable End - -
V113147

Install in this Direction - -


i.

Twist the cable end as shown in the illustration and install the rear seat lock release strap assembly.


ii.

Attach the clamp.



Hide 71940J 17.INSTALL NO. 2 SEAT HEADREST ASSEMBLY LH

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

Hide 71987H 18.INSTALL REAR SEAT HEADREST CABLE

a.
B647213C01
0.833,1.75 1,1.75 1,1.75 1.229,1.198 true 4,0.083 4.385,0.417 0.385,0.333 18 true i 1.615,1.417 1.833,1.75 0.219,0.333 18 true ii 6.365,1.667 6.583,2 0.219,0.333 18 true ii 0.667,1.667 0.885,2 0.219,0.333 10 false *a
*a Cable End - -
V113147

Install in this Direction - -


i.

Twist the cable end as shown in the illustration and install the rear seat headrest cable.


ii.

Install the screw and attach the clamp.



Hide 71844P 19.INSTALL REAR NO. 2 SEAT NO. 4 RECLINING COVER LH

Hide 71834N 20.INSTALL REAR NO. 2 SEAT NO. 3 RECLINING COVER LH

Hide 71843Q 21.INSTALL REAR NO. 2 SEAT NO. 2 RECLINING COVER LH

Hide 71833N 22.INSTALL REAR NO. 2 SEAT NO. 1 RECLINING COVER LH

Hide 71697M 23.INSTALL REAR SEAT BACK PROTECTOR

Hide 72985A 24.INSTALL REAR HEADREST COVER LH

Hide 79024D 25.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

Z101186

NOTICE:

Be careful not to dirty or damage the No. 2 seatback cover sub-assembly LH and rear seatback pad LH.


HINT:

When installing a No. 2 seatback cover sub-assembly LH, refer to Precaution in order to prevent wrinkles from forming.

(Click here)



Hide 79285C 26.INSTALL NO. 2 SEATBACK PAD LH

Hide 72635D 27.INSTALL SEATBACK LOCK HOOK

a.
B672111C01
3.167,1.917 2.5,1.469 false 0.25,0.083 0.5,0.417 0.25,0.333 18 false i 3.177,1.833 3.427,2.167 0.25,0.333 10 false *a 1.656,0.583 1.906,0.917 0.25,0.333 10 false (a)
*a Hole - -


i.

Measure the length (a) of the rear seat lock release strap assembly and discern the type A or Type B.

Dimension:
Type Length (a)
Type A 95 mm (3.74 in.)
Type B 75 mm (2.95 in.)




b.

Type A:

B672189C02
4.573,0.688 5.063,0.688 false 5.875,1.188 6.354,1.188 false 4.396,0.604 4.708,0.802 0.313,0.198 10 false *a 6.396,1.115 6.708,1.313 0.313,0.198 10 false *b 0.417,0.083 0.75,0.417 0.333,0.333 18 false i
*a Front Side *b Rear Side


i.

Install the seatback lock hook as shown in the illustration.



c.

Type B:

B672186C03
4.656,0.667 5.073,0.667 false 5.875,1.167 6.292,1.167 false 0.417,0.083 0.979,0.563 0.563,0.479 18 false i 4.5,0.583 5.083,1 0.583,0.417 10 false *a 6.292,1.083 6.875,1.5 0.583,0.417 10 false *b
*a Front Side *b Rear Side


i.

Install the seatback lock hook as shown in the illustration.



Hide 79207C 28.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH

Hide 72057K 29.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B647207C01
4.417,0.667 4.563,0.667 4.563,0.667 4.865,0.979 true 4.552,0.167 4.833,0.521 0.281,0.354 18 false i 2.469,0.479 2.75,0.833 0.281,0.354 18 false iii 2.802,2.146 3,2.5 0.198,0.354 18 true iii 4.26,0.583 4.542,0.938 0.281,0.354 10 false *a 5.469,0.729 5.667,1.083 0.198,0.354 18 true ii
*a Cable End - -
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


i.

Twist the cable end as shown in the illustration connect the fold seat lock control cable assembly LH.


ii.

Attach the clamp.


iii.

Install the 2 screws and install the rear seat lock control lever sub-assembly LH.



Hide 72615P 30.INSTALL REAR SEATBACK LOCK STRIKER COVER

Hide 66310P 31.INSTALL ROPE HOOK ASSEMBLY

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

Hide 32.INSTALL NO. 2 SEATBACK ASSEMBLY LH

a.
B624601C02
0.521,0.115 0.802,0.469 0.281,0.354 18 false i
V113147

Install in this Direction - -


i.

Using a T45 "TORX" socket wrench, install the 4 "TORX" bolts and No. 2 seatback assembly LH.

Torque:
60 N*m (612 kgf*cm, 44 ft.*lbf)



Hide 71692M 33.INSTALL REAR NO. 2 SEAT UPPER CUSHION HINGE COVER LH

Hide 73590 34.INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

Z101186

(Click here)

Hide 71694J 35.INSTALL REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH

Hide 74865H 36.INSTALL CENTER PROTECTOR COVER (for RH Seat)