| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SYMBOL EMBLEM | 75741E | ( ) |
- | - |
| 2 | BACK DOOR NAME PLATE | 75441B | ( ) |
- | - |
| 3 | BACK DOOR NAME PLATE | 75441C | ( ) |
- | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 4 | REAR BODY NO. 3 NAME PLATE | 75473B | ( ) |
- | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 5 | FRONT FENDER NO. 1 NAME PLATE | 75361A | ( ) |
- | - |
| *A | for GR SPORT | *B | for LH Side |
| *C | for RH Side | - | - |
| ● | Non-reusable part | - | - |
75741E 1.REMOVE SYMBOL EMBLEM
|
|
| Part | Temperature |
|---|---|
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the symbol emblem excessively.
| *a | Boss Position | - | - |
Put protective tape around the symbol emblem.
Heat the adhesive of the symbol emblem using a heat light.
Remove the symbol emblem by the following procedure.
1. Insert piano wire between the back door outside garnish and symbol emblem.
Be careful of the boss positions.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the back door outside garnish.
Be careful not to damage the back door outside garnish.
75441B 2.REMOVE BACK DOOR NAME PLATE
|
|
| Part | Temperature |
|---|---|
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door name plate excessively.
| *a | Boss Position | - | - |
Put protective tape around the back door name plate.
Heat the adhesive of the back door name plate using a heat light.
Remove the back door name plate by the following procedure.
1. Insert piano wire between the back door outside garnish and back door name plate.
Be careful of the boss positions.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the back door outside garnish.
Be careful not to damage the back door outside garnish.
75441C 3.REMOVE BACK DOOR NAME PLATE
|
|
| Part | Temperature |
|---|---|
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the back door name plate excessively.
| *a | Boss Position | - | - |
Put protective tape around the back door name plate.
Heat the adhesive of the back door name plate using a heat light.
Remove the back door name plate by the following procedure.
1. Insert piano wire between the back door outside garnish and back door name plate.
Be careful of the boss positions.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the back door outside garnish.
Be careful not to damage the back door outside garnish.
75473B 4.REMOVE REAR BODY NO. 3 NAME PLATE
|
|
| Part | Temperature |
|---|---|
| Rear Body No. 3 Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear body No. 3 name plate excessively.
Put protective tape around the rear body No. 3 name plate.
Heat the adhesive of the rear body No. 3 name plate using a heat light.
Remove the rear body No. 3 name plate by the following procedure.
1. Insert piano wire between the back door panel and rear body No. 3 name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the rear body No. 3 name plate to the back door panel.
Be careful not to damage the back door panel.
75361A 5.REMOVE FRONT FENDER NO. 1 NAME PLATE (for GR SPORT)
|
|
| Part | Temperature |
|---|---|
| Front Fender No. 1 Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the front fender No. 1 name plate excessively.
for LH Side:
Put protective tape around the front fender No. 1 name plate
Heat the adhesive of the front fender No. 1 name plate using a heat light.
Remove the front fender No. 1 name plate by the following procedure.
1. Insert piano wire between the front door panel and front fender No. 1 name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the front fender No. 1 name plate to the front door panel.
Be careful not to damage the front door panel.
for RH Side:
Put protective tape around the front fender No. 1 name plate
Heat the adhesive of the front fender No. 1 name plate using a heat light.
Remove the front fender No. 1 name plate by the following procedure.
1. Insert piano wire between the front door panel and front fender No. 1 name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
3. Pull the piano wire and scrape off the double-sided tape that holds the front fender No. 1 name plate to the front door panel.
Be careful not to damage the front door panel.