| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | END COVER | 29314A | ( ) |
- | - |
| 2 | NO. 1 VACUUM PUMP O-RING | 29343 | ( ) |
- | - |
| 3 | VACUUM PUMP VANE | 29331A | ( ) |
- | - |
| 4 | VACUUM PUMP VANE CAP | 29329 | ( ) |
- | - |
| *1 | INSPECT VACUUM PUMP HOUSING | - | - |
| ● | Non-reusable part |
|
Engine Oil |
29314A 1.REMOVE END COVER
To prevent the coupling of the vacuum pump assembly from contacting the workbench, support the vacuum pump assembly with wooden blocks or an equivalent object.
Using a T30 "TORX" socket wrench, remove the 5 screws and end cover.
Hold the pump so that the pump installation surface and fitting parts will not be damaged.
As the housing deforms when force is applied, do not secure the housing with a tool such as a vise.
Securely fit the T30 "TORX" socket wrench to the screws.
Do not drop the end cover.
Do not damage the end cover.
As there will be a small amount of oil remaining in the vacuum pump housing, be careful not to spill the oil when removing the end cover.
| *a | Do not rotate the coupling. |
Do not rotate the coupling as oil remaining in the vacuum pump housing may be discharged.
As the vacuum pump vane cap may become damaged, do not rotate the coupling counterclockwise.
29343 2.INSPECT NO. 1 VACUUM PUMP O-RING
Using a screwdriver with its tip wrapped with protective tape, remove the No. 1 O-ring.
Do not damage the groove.
|
Engine Oil | - | - |
Check that there is no foreign matter in the engine oil remaining in the vacuum pump housing.
If there is foreign matter, replace the vacuum pump assembly.
29331A 3.REMOVE VACUUM PUMP VANE
Remove the vacuum pump vane together with the 2 vacuum pump vane caps.
When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation positions and orientation.
Do not drop the vacuum pump vane and vacuum pump vane caps.
4.REMOVE VACUUM PUMP VANE AND VACUUM PUMP VANE CAP
| *1 | Vacuum Pump Vane Cap | *2 | Vacuum Pump Vane |
Remove the 2 vacuum pump vane caps from the vacuum pump vane.
When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation positions and orientation.
Do not drop the vacuum pump vane and vacuum pump vane caps.
Check that there is no damage such as cracks or fractures in the vacuum pump vane and vacuum pump vane cap.
If there is damage, replace the vacuum pump assembly.