Home › Engine / Hybrid System › F33A-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (for Urea SCR System) › from 2021.07
RM38G0E _51 Engine / Hybrid System _106332 F33A-FTV EMISSION CONTROL _0491915 EXHAUST GAS TEMPERATURE SENSOR(for Urea SCR System) A

F33A-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for Urea SCR System)  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
A493049N02
1.917,1 2.083,1 2.083,1 2.292,1.146 true 3.667,0.75 4,0.75 true 1.698,0.875 1.979,1.229 0.281,0.354 18 false 2 4.417,0.604 4.698,0.958 0.281,0.354 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 1 SENSOR BRACKET 89439D - - -
2 NO. 4 EXHAUST GAS TEMPERATURE SENSOR 89425C (Click here) - -

PROCEDURE

Hide 89439D 1.REMOVE NO. 1 SENSOR BRACKET

Z101186

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.



a.
A493033


Hide 89425C 2.INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR

Z101186

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.



a.
A493034N01
0.313,0.094 0.594,0.448 0.281,0.354 18 false i 3.844,0.083 4.125,0.438 0.281,0.354 18 false ii

i.

Disconnect the connector and detach the 2 clamps.


ii.

Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor.

NOTICE:

If the exhaust gas temperature sensor has been struck or dropped, replace it.