11101E 1.REMOVE CAMSHAFT POSITION SENSOR
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor.
If the camshaft position sensor has been struck or dropped, replace it.
Perform this procedure only when reusing the camshaft position sensor.
Remove the O-ring from the camshaft position sensor.
Make sure to only remove the O-ring with bare hands.
When removing the O-ring, be careful not to damage the O-ring groove of the camshaft position sensor.
If the O-ring groove of the camshaft position sensor is damaged, replace the camshaft position sensor with a new one.