INITIALIZATION AND REGISTRATION
When replacing the ECM and/or any other components in the following chart, perform the corresponding utility items.
When the ECM and one or more other components are replaced at the same time, perform the following utility items by following the instructions shown on the GTS display, starting with the ECM.
| Replacement Part | Utility Item |
|---|---|
| ECM |
|
| Turbocharger sub-assembly |
|
| Diesel throttle body assembly | Initialization Click here( ) |
| Electric EGR control valve assembly | |
| Turbocharger sub-assembly |
When the ECM must be replaced, before replacing the ECM, perform the "Learning Values Save" function using the GTS. Then after installing a new ECM, perform all of the initializations/registrations for the "Learning Values Write" function by following the instructions shown on the GTS display.
WHEN USING GTS
Observe the following items for safety reasons:
Before using the GTS, read the instruction manual.
Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
When driving the vehicle for testing purposes using the GTS, 2 persons are required. One drives the vehicle, and the other operates the GTS.